G37 Coupe
Sponsored By:
Sponsored By:

What did you do to your coupe today?

Thread Tools
 
Search this Thread
 
Old 07-13-2023, 09:09 PM
  #2071  
digital.aaron
Registered Member
 
digital.aaron's Avatar
 
Join Date: Apr 2022
Location: PNW
Posts: 59
Received 17 Likes on 14 Posts
My coupe is creeping up on 100k (we're at 95.5k right now), and I've decided to take care of a bunch of maintenance items, and also do some more suspension upgrades to try to correct my terrible bumpsteer and my equally terrible rear camber (around -4 degrees).
The list is something like this:

full brake job
all fluids replaced
valve cover gaskets
spark plugs
R&R passenger front cv axle, possibly driver's too (have both)
bent bumpsteer correction tie rod ends
gktech FUCAs with more adjustability than the Godspeed crap i have now
gktech full rear kit with more adjustability than the Godspeed crap i have now
diff bushing
diff brace
subframe bushings

Got the last of the parts in today, and of course, my preferred shop is booked until the end of October.

Damn you, Track Season! /s


Looks like I'll be learning how to DIY more stuff on the car soon. I'm pretty sure i can handle the gaskets, spark plugs, brake, and possibly the cv axle. I've heard the passenger side is the worse of the two, though, so not looking forward to that.
Old 07-17-2023, 03:38 PM
  #2072  
mummy2
Registered Member
 
mummy2's Avatar
 
Join Date: May 2011
Location: Baltimore
Posts: 809
Received 108 Likes on 93 Posts
Had my alternator replaced Saturday at Goodyear auto for less than $600. What in the hell is wrong with Infiniti? Bastards charging almost $700 after tax for the part plus about 4 and a half hours labor!!! Not to mention around $300 for their battery. Called 3 different dealers and they all were $1250-$1450 for the job. I see that's Infiniti way of saying don't even bring your car in for service if you aren't under warranty. Volvo had a thing, don't know if it's still does, where if your car was something like 10 years old or older you would get a 20 percent discount on service. Nissan and Infiniti needs something like that.
Old 07-17-2023, 09:15 PM
  #2073  
TheDevilsG
Registered Member
 
TheDevilsG's Avatar
 
Join Date: Nov 2018
Posts: 379
Received 118 Likes on 92 Posts
Originally Posted by Ginge247
Painted the calipers with VHT anodised purple and some custom decals. 💜

That looks sick! Nice job!
The following users liked this post:
liquidfluidity (08-20-2023)
Old 07-29-2023, 12:09 AM
  #2074  
User 122320
Registered Member
iTrader: (2)
 
User 122320's Avatar
 
Join Date: Mar 2015
Posts: 907
Received 74 Likes on 56 Posts
replaced the ugly G37 shift **** with the OG G35.



Old 08-01-2023, 04:42 AM
  #2075  
DB0037
Registered Member
 
DB0037's Avatar
 
Join Date: Oct 2021
Location: Sydney, Australia
Posts: 5
Received 15 Likes on 2 Posts
Hello from Australia with a RHD Skyline coupe imported from Japan

After 2 years of waiting and stockpiling parts, redid most of the suspension setup - coils, arms, braces, swaybars, end links, bushings, wheels, tyres, rotors, lines, pads









The following 12 users liked this post by DB0037:
2.2Lude (08-01-2023), camopaint0707 (01-16-2024), Cortez (08-04-2023), deep0542 (09-04-2023), EcstaticG37XS (08-21-2023), goldbug (08-26-2023), Josh South (09-25-2023), Rochester (08-01-2023), rotarymike (08-01-2023), SkysG37 (08-01-2023), takemorepills (08-01-2023), TheDevilsG (09-04-2023) and 7 others liked this post. (Show less...)
Old 08-20-2023, 10:40 PM
  #2076  
liquidfluidity
Registered Member
 
liquidfluidity's Avatar
 
Join Date: Jan 2023
Location: Iowa
Posts: 29
Received 1 Like on 1 Post
Cats/Exhaust

Replaced cats with FI high flow resonated cats and install a Nismo exhaust. Just waiting on the extensions.
The following users liked this post:
goldbug (08-26-2023)
Old 08-26-2023, 08:38 AM
  #2077  
goldbug
Premier Member

iTrader: (4)
 
goldbug's Avatar
 
Join Date: Mar 2014
Location: SE Florida
Posts: 528
Received 168 Likes on 110 Posts
Removed my Work RS aluminum lug nuts and installed Project Kics R40 Iconix lug nuts a few days ago. Peace of mind not running aluminum lug nuts.


Old 08-26-2023, 08:53 AM
  #2078  
socketz67
Super Moderator
 
socketz67's Avatar
 
Join Date: Aug 2012
Location: San Diego, CA
Posts: 1,830
Received 283 Likes on 237 Posts
Originally Posted by ILM-NC G37S
I would strongly suggest that while you are flushing the coolant system consider replacing the plastic heater hose coupling with a metal unit. This plastic connector has a high failure rate with these cars. Being that the cooling system will already be drained makes for a perfect opportunity to tackle this before it breaks and leaves you in a pickle.
I would include replacement of both the upper and lower radiator hoses with OEM rubber hoses and also include replacement of the thermostat. In addition, replace the PCV valves (2) and clean the throttle bodies.
The following users liked this post:
goldbug (08-28-2023)
Old 09-04-2023, 02:01 PM
  #2079  
mummy2
Registered Member
 
mummy2's Avatar
 
Join Date: May 2011
Location: Baltimore
Posts: 809
Received 108 Likes on 93 Posts
Originally Posted by ILM-NC G37S

Finally got around to swapping out my '08 headrests and installing a Bose set from a 2010 'vert.

And, before you folks start flaming at me, let me say that I am NOT a audiophile. For my listening needs- and for as little as I actually drive the car- the Bose system is fine.
I assume the speakers don't work do they? And do they look bulky in person?
Old 09-04-2023, 02:17 PM
  #2080  
ILM-NC G37S
Registered Member

iTrader: (3)
 
ILM-NC G37S's Avatar
 
Join Date: Apr 2014
Location: NC
Posts: 4,287
Received 1,333 Likes on 1,079 Posts
Originally Posted by mummy2
I assume the speakers don't work do they?
Of course they work. Otherwise, what would be the point of swapping them over, lol?

I do not know about them being bulky. They're OEM so they fit the contour of the seat just fine. Besides, how many folks notice headrests?
The following 2 users liked this post by ILM-NC G37S:
takemorepills (09-04-2023), TheDevilsG (09-04-2023)
Old 09-04-2023, 03:03 PM
  #2081  
mummy2
Registered Member
 
mummy2's Avatar
 
Join Date: May 2011
Location: Baltimore
Posts: 809
Received 108 Likes on 93 Posts
Originally Posted by ILM-NC G37S
Of course they work. Otherwise, what would be the point of swapping them over, lol?

I do not know about them being bulky. They're OEM so they fit the contour of the seat just fine. Besides, how many folks notice headrests?
Excuse me for being so stupid. Someone as stupid as me might have swapped just for the looks. What do they plug into to get the sound?
Old 09-04-2023, 03:05 PM
  #2082  
TheDevilsG
Registered Member
 
TheDevilsG's Avatar
 
Join Date: Nov 2018
Posts: 379
Received 118 Likes on 92 Posts
Originally Posted by DB0037

Handling mods make me grin ear to ear, nice setup. Also; those rims and that ride height btw 👌
The following users liked this post:
DB0037 (09-04-2023)
Old 09-04-2023, 04:37 PM
  #2083  
ILM-NC G37S
Registered Member

iTrader: (3)
 
ILM-NC G37S's Avatar
 
Join Date: Apr 2014
Location: NC
Posts: 4,287
Received 1,333 Likes on 1,079 Posts
Originally Posted by mummy2
Excuse me for being so stupid. Someone as stupid as me might have swapped just for the looks. What do they plug into to get the sound?
It is not like that, mummy2. Don't take it so personally and, PLEASE, do not use the term "stupid." Your contributions are just as welcomed as most on here. For the record, most of my mods are for "aesthetic/ ambience" or "creature comfort" goals and work as intended.

The headrest speakers tap into the outputs at the Bose amp for the rear/ side armrest speakers. This "blends" the rear sound and moves it forward slightly without having to over adjust "fade." I do not ever have rear passengers so this "additional fade" allows me to hear better (especially dialogue and sound effects) especially when I have the sunroof open. Of course, the newer-style air deflector helped a ton with wind noise but that was a separate mod.

I have zero interest in researching, shopping, and installing custom audio equipment. Kudos to those that do, but the Bose system is fine for my needs especially with a car that is rarely driven. I can always unplug the rear side speakers down the road and bring the full rear sound to the headrest speakers or swap in a Bose amp from the 'Vert to take advantage of the true Bose "AudioPilot" system. Right now neither is being considered.

Last edited by ILM-NC G37S; 09-05-2023 at 10:55 AM.
Old 09-14-2023, 04:25 PM
  #2084  
CorvetteMongo
Registered Member
 
CorvetteMongo's Avatar
 
Join Date: Apr 2023
Location: Central Wisconsin
Posts: 25
Likes: 0
Received 6 Likes on 6 Posts
The Steering wheel cover, floor mats and pedal covers.


The following users liked this post:
socketz67 (09-14-2023)
Old 09-16-2023, 11:04 AM
  #2085  
snek
Registered Member
 
snek's Avatar
 
Join Date: Sep 2023
Location: jacksonville, fl
Posts: 12
Received 0 Likes on 0 Posts
Originally Posted by ILM-NC G37S
I would strongly suggest that while you are flushing the coolant system consider replacing the plastic heater hose coupling with a metal unit. This plastic connector has a high failure rate with these cars. Being that the cooling system will already be drained makes for a perfect opportunity to tackle this before it breaks and leaves you in a pickle.
do you have any pictures of where this is located? I’m new to cars and would appreciate any tips on how to do this.


Quick Reply: What did you do to your coupe today?



All times are GMT -4. The time now is 02:23 AM.