When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finished my custom Saikou Michi dual oil catch can setup. Link to the thread I started if anyone wants to know more (hyperlink function isn’t working correctly mods):
Z1 cold air intake and power steering cooler installed. I like the z1 blue cones and with them being carb legal now I had to pull the trigger.
Nice! Cooling all sorted with your oil cooler and that power steering. That car is going to be giving you ZERO headaches at the track, Get out there and play!
Nice! Cooling all sorted with your oil cooler and that power steering. That car is going to be giving you ZERO headaches at the track, Get out there and play!
Thank you sir! Next is roll cage and harnesses before I get out there. Still hitting the canyons in the mean time. I ordered a very nice set of Takata harnesses. Just waiting on the roll cage fabrication to start.
Thank you sir! Next is roll cage and harnesses before I get out there. Still hitting the canyons in the mean time. I ordered a very nice set of Takata harnesses. Just waiting on the roll cage fabrication to start.
oO You got a serious build coming i see!
Get out there and do some lapping days in the meantime anyhow, just to have some fun with that beast!
A stock G with an oil cooler can go do some laps, and you sir are well beyond that already lol
Replaced drive belt, tensioner and three pulleys. Replaced both downstream O2 sensors.
Replaced stock HID headlight bulbs with 6000k bulbs. Driver’s stock bulb stopped working.
Was going to convert fog lights to HID but could not figure out how to get dustcover off without cutting stock wires. Even if I had, I was not sure how I would drill a hole large enough for the HID harness to pass through.
My belt had started screeching randomly. See pics of old tensioner. Explains why.
I have always been annoyed by my scuffed up engine cover and missing emblem since i bought the car. I do have plans for an ait CF cover but in the meantime decided to try something for fun out of boredom. I suck at painting things but why not try lol...
(Engine cover sand/paint/and did some test fitting while i wait for the burnt bolts that haven't arrived yet)
Before^ Sanding Ready to prime Priming Mid Painting
Not perfect but good enough until i get the Ait CF cover, Im happy 😁
I've found that as long as the part you're painting isn't exposed to the elements and will never be handled then sanding and priming aren't necessary.
Installed soul function chassis bracing. Installed half myself and had a shop install the other half. Thank you to member TheDevilsG for convincing me to buy. You’re right sir, big difference when used together.
Installed soul function chassis bracing. Installed half myself and had a shop install the other half. Thank you to member TheDevilsG for convincing me to buy. You’re right sir, big difference when used together.
Sweet, You got them all in! Congrats and you're welcome man!
Its shocking how great these cars can handle with some supporting mods aint it?
09-17-2021, 09:21 PM
oO You got a serious build coming i see!
