Spoiler Problems
#1
Spoiler Problems
So I just order this new spoiler which is stillFactory some what.
JKS® - Factory Style Rear Spoiler with Light - 2008 Infiniti G37 Spoiler
I pulled off the little chrome one now what should I dowiththis one is it just screwed in and some double sided tape or should I actually give it some type of molding finish ?
JKS® - Factory Style Rear Spoiler with Light - 2008 Infiniti G37 Spoiler
I pulled off the little chrome one now what should I dowiththis one is it just screwed in and some double sided tape or should I actually give it some type of molding finish ?
#2
Did the spoiler not come with any directions? how's the fitment? When installing the factory oem spoiler, you need to drill out some additional holes. Not sure how the aftermarket spoiler gets put on. Can you take any pics?
#3
"So I just order this new spoiler which is stillFactory some what. "
Obviously it's not factory some what. The OEM one you have to drill holes, you get instructions and new lifts for the trunk. You went cheap and that's what you got.
Obviously it's not factory some what. The OEM one you have to drill holes, you get instructions and new lifts for the trunk. You went cheap and that's what you got.
#4
From that same website:
"Infiniti G37 Coupe 2008-2011, Factory Style Rear Spoiler with Light. Spoilers are usually standard equipment on the factory hot rods. "
Hot Rods????? that would have sent me packing.
"Infiniti G37 Coupe 2008-2011, Factory Style Rear Spoiler with Light. Spoilers are usually standard equipment on the factory hot rods. "
Hot Rods????? that would have sent me packing.
#5
Send it back. Get your money back and buy the real deal. I learned the hard way...had the same spoiler...horrible fit and i got ripped off by the seller. To the tune of 197.
Then i bought the original...perfect.
Lesson learned.
Then i bought the original...perfect.
Lesson learned.
Trending Topics
#8
"Factory Style" = Replica
You're suppose to drill screws into the holes where the chrome spoiler was screwed into and I believe an additional 2 holes into your trunk. But since it is a replica, you can try securing it with 3M tape, I'm sure it'll hold up fine.
You're suppose to drill screws into the holes where the chrome spoiler was screwed into and I believe an additional 2 holes into your trunk. But since it is a replica, you can try securing it with 3M tape, I'm sure it'll hold up fine.
#9
No idea what you should get with the fake one you bought but for the real OEM spoiler you get:
The spoiler
Full instructions
New trunk bumpers
New trunk hydrolic lifts
Mounting hardware which includes the clips you have to install AFTER you drill the new required holes in your trunk.
Wiring hardness for the brake light
The spoiler
Full instructions
New trunk bumpers
New trunk hydrolic lifts
Mounting hardware which includes the clips you have to install AFTER you drill the new required holes in your trunk.
Wiring hardness for the brake light
Thread
Thread Starter
Forum
Replies
Last Post