Black Betty

iTrader: (60)

This one is very minor. It only applies to cars with the Technology package.

If your wheel is turned sharply to the right with your AFS headlights on, you know your headlights will be turned to the right. However if you shift into reverse, it negates the AFS function and they will swing back straight again. Shft back into first and they swing right again. I only discovered this last night.

kevster

Help needed please!

I'm trying to get the reverse camera to work without putting my 6MT in reverse. Someone mentioned that you need to turn the Radio off, keep the Settings button pushed and turn the Radio Tune ****. I did this but no menu showed up to enable the camera.

Am I missing something please?

Thanks,
Kev

ucla bruin

iTrader: (7)

Don't think there's a way to enable reverse camera when it's not in reverse.

What you described sounds like the way to get to the diagnostic menu.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

UNV-IT46

iTrader: (3)

correct. and when you go into the diag screen you can go to adjust camera. which will leave the camera on all the time while your driving. not in just reverse. down side is nothing else works while the camera is on. no nav, no cd, radio phone nothing.

ucla bruin

iTrader: (7)

^oh cooool.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

UNV-IT46

iTrader: (3)

i just did it again for fun on the way back into the office and another thing is when you activate the camera by the diag screen, when you put the car back in reverse it doesnt engage the moving lines.

carthage2001

Is there a way to have your car automatically lock the doors when you start driving? My jetta would do that when you started driving over 5 miles an hour or something like that.

KPierson

iTrader: (2)

The only way to enable speed conrolled door locks is to purchase three modules from www.KPtechnologies.com (Door Lock module, relay pack, Programmable Speed Switch).

DrJones

iTrader: (1)

^^ Yep and I think Jeremy (BlackBetty) got this so you could probably PM him for any questions....

SkyMG37x

RTFM - Not sure what the others are saying here since it's a feature of the car:

●

The automatic lock and unlock functions can be deactivated or activated independently of each other.

3. Do one of the following within 20 seconds of performing step 2:

●

To change AUTO UNLOCK settings: push and hold the power door lock switch to the UNLOCK position for more than 5 seconds.

● To change AUTO LOCK settings: push and hold the power door lock switch to the LOCK position for more than 5 seconds.

4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.

5. The ignition must be placed in the OFF and ON position again between each setting change.

PSYH

^^^ Not for the '08 models.

KPierson

iTrader: (2)

Yeah, I've never seen that either - must be an '09 thing.

UNV-IT46

iTrader: (3)

damn 09's

KPierson

iTrader: (2)

Well, if nothing else, it's nice to see Nissan finally added this feature after 7 years without it.

I always thought it was weird the G35 couldn't do this considering my 1994 Chevy Cavalier did it with no problems at all!

Black Betty

iTrader: (60)

Any plan to add an auto unlock feature? I have the window roll up module and have the auto lock feature enabled, it works great (once I worked the bugs out of my bad installation ) but I wish that it could auto unlock when the parking brake is activated.