G37 Coupe

Irregular ride height?

Thread Tools
 
Search this Thread
 
Old 06-20-2007 | 01:53 AM
  #16  
nghiars's Avatar
nghiars
Registered User
iTrader: (1)
 
Joined: Apr 2006
Posts: 0
Likes: 0
dont all the G's have bigger wheel gaps in the front... my 03 coupe is like that.. but nothing lowering springs cant fix
Old 06-20-2007 | 02:10 AM
  #17  
finagle69's Avatar
finagle69
Registered User
iTrader: (3)
 
Joined: May 2006
Posts: 2,929
Likes: 5
From: Sacramento, CA
Originally Posted by Rampant
^ okay, I trust you guys. That is why I wasn't sure if it was the images I have seen, or visible in person.
yeah, all the 'real' pics show differently than the one you posted.
Old 06-20-2007 | 12:19 PM
  #18  
GT-Ron's Avatar
GT-Ron
Registered User
iTrader: (3)
 
Joined: Jan 2005
Posts: 0
Likes: 0
From: Texas
It's not like the front is really sitting higher than the rear, it's a trick on the eyes, as it's simply the front wheel opening that is bigger than the rear wheel opening. This should be very noticeable just by looking at the opening profile pic in this thread. In fact, it even makes the rear tire look like a smaller diameter than the front, which clearly is not the case.

Of course, this does impact the visual gap between wheel and fender, but that has nothing to do with the ground clearance or ride height.
Old 06-20-2007 | 12:33 PM
  #19  
allforthecash's Avatar
allforthecash
Registered User
 
Joined: Nov 2004
Posts: 0
Likes: 0
Originally Posted by Rampant
It seems like most pictures I see, the front of the car has a higher ride height than the rear. I find this particularly odd because they went to great lengths to maximize the rake appearance.

The best pic I could find is this:

The front end looks much higher than the rear.

Am I just nuts? To those who have seen it in person -- it is noticeable?

(edit: forgot pic)
i think it looks off because the wheel well arch in the front is higher up than that of the rear.....
Old 06-20-2007 | 12:57 PM
  #20  
Rampant's Avatar
Rampant
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 141
Likes: 0
From: SoCal
Originally Posted by GT-Ron
It's not like the front is really sitting higher than the rear, it's a trick on the eyes, as it's simply the front wheel opening that is bigger than the rear wheel opening. This should be very noticeable just by looking at the opening profile pic in this thread. In fact, it even makes the rear tire look like a smaller diameter than the front, which clearly is not the case.

Of course, this does impact the visual gap between wheel and fender, but that has nothing to do with the ground clearance or ride height.
To me the wheel opening is the ride height. If the front wheel opening is larger, that signifies (again, to me) that the front is riding higher. After all, it looks that way. If they needed the nose to be higher for ground clearance, why didn't they make the wheel opening smaller (or the rear one larger)? It makes no sense to me that they would purposefully have the wheel gap noticeably larger on the front -- especially when they are going for the rake/down on the front look.

I guess it really doesn't matter -- it is what it is. I was just trying to see if it was just the pics, or if it was really that way. Thankfully, that is what coilovers are for. I just hope someone makes a tapered rocker to even it out when the stance is "proper" (visually).

On a side note, don't race teams measure ride height from the ground to the fender opening?
Old 06-20-2007 | 04:18 PM
  #21  
GT-Ron's Avatar
GT-Ron
Registered User
iTrader: (3)
 
Joined: Jan 2005
Posts: 0
Likes: 0
From: Texas
Perhaps I shouldn't have included 'ride height' along with 'ground clearance'. The front wheel opening isn't larger because they need the front to ride higher (have more ground clearance) than in the rear. The ground clearance is almost the same front to rear. The rear wheel opening is smaller for asthetic/design purposes. The design's success is open for debate. The front can't be just as small as the rear, but I agree that the rear should be a little closer to the front wheel opening's dimensions.

They are close, technically, (about the width of the vertical wheel-well/fender lip difference in height), but it certainly looks a lot more pronounced than the difference suggests.

Perhaps some deep-dish wheels in back will give the rear some authority.
Old 06-20-2007 | 08:05 PM
  #22  
JReedG35C's Avatar
JReedG35C
Registered User
 
Joined: Jan 2004
Posts: 93
Likes: 0
From: Maryland
It's not really the height, it's the huge front wheelwells.
Old 06-20-2007 | 11:17 PM
  #23  
allforthecash's Avatar
allforthecash
Registered User
 
Joined: Nov 2004
Posts: 0
Likes: 0
Originally Posted by JReedG35C
It's not really the height, it's the huge front wheelwells.
Yup!! Like i mentioned above..the front wheel wells are higher up
Old 06-21-2007 | 01:43 AM
  #24  
fkat's Avatar
fkat
Registered Member
 
Joined: May 2007
Posts: 295
Likes: 0
From: New York
It's the lens on the camera. On most of these wide angle shots edges always appear larger than center when in fact it is an optical distortion. The rear is in the center of the original picture.
Old 06-21-2007 | 12:01 PM
  #25  
Rampant's Avatar
Rampant
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 141
Likes: 0
From: SoCal
Originally Posted by fkat
It's the lens on the camera. On most of these wide angle shots edges always appear larger than center when in fact it is an optical distortion. The rear is in the center of the original picture.
I never would have figured that one out -- thank you! I am glad to hear that photo exaggerates the wheel gap.
Old 06-23-2007 | 12:55 AM
  #26  
Pauley's Avatar
Pauley
Registered User
 
Joined: May 2006
Posts: 44
Likes: 0
From: Baltimore,md
I did'nt notice the wheel gap at the ny auto show.The model there did have the 19" sport wheels not the 18's in the picture.Maybe that helps but i think it depends on the angle your looking at.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4DRZ
Brakes & Suspension
58
11-07-2015 09:32 PM
BurtoN86
Brakes & Suspension
13
11-03-2015 05:40 PM
BurtoN86
Brakes & Suspension
2
09-30-2015 04:32 AM
VQCrew
Wheels & Tires
1
09-26-2015 02:19 PM




All times are GMT -4. The time now is 12:41 AM.