More mods
09-02-2005 | 12:42 AM
#1
Thread Starter
Registered User
Joined: Sep 2004
Posts: 519
Likes: 0
From: Miami, FL
More mods
They came today. HKS TI stainless steel mufflers. 170mm cans, 130mm tips, and 75mm inlet. The car gets a custom 3" dual exhaust and test pipes on Tuesday or Wednesday. Also I am having a Power Enterprises radiator installed tomorrow. Some how my stock radiator got a hole in it. 
Oh well it wasn't good enough for my set up anyway.
I found a local shop that knows what the *** they are doing. They have to make brackets for the radiator cause it is for the 350z.
They have a 350z with a fully built motor....rods, pistons, cams, sleeves, ferrera valves, and a DTA standalone. They are shooting for 1000whp.
Oh well it wasn't good enough for my set up anyway.I found a local shop that knows what the *** they are doing. They have to make brackets for the radiator cause it is for the 350z.
They have a 350z with a fully built motor....rods, pistons, cams, sleeves, ferrera valves, and a DTA standalone. They are shooting for 1000whp.
Last edited by Gman2004; 09-02-2005 at 01:17 AM.
09-02-2005 | 02:47 AM
#4
FGC South Florida BOD
Joined: Sep 2004
Posts: 2,730
Likes: 0
Jorge's car is off the chain, nobody can compete with him.. unless your name is G352NV or something. The scary part is that he's been on the forums for a year and nobody has seen him yet Too bad you won't be here on the 17th, but it would be awesome if you can make it up to Towers one night.. I'll be there tomorrow with the Bimmies. Sorry, you won't get me off your back until all of us get to see your car in person! When is your bodykit getting installed? And where's that shop with that 1000hp Z if it's not a secret, I might want to go check it out.
Too bad you won't be here on the 17th, but it would be awesome if you can make it up to Towers one night.. I'll be there tomorrow with the Bimmies. Sorry, you won't get me off your back until all of us get to see your car in person! When is your bodykit getting installed? And where's that shop with that 1000hp Z if it's not a secret, I might want to go check it out.
09-02-2005 | 07:37 AM
#5
Registered User
Joined: Feb 2004
Posts: 4,184
Likes: 0
Not true Finiti. Jorge seems to be partial to non-FGC members. He took CKY2K (Will) for a ride already.
Nice to know where us club members stand.
That's ok though, because I actually got to sit behind the wheel of Jorges car and go "zooooooom, squeeeeelllll, zooooooom, squeeeeellllll, zoooooooooom, chirp, zooooooommmmm" while playing race car driver in my head. 
Also, I wouldn't count out djniknala or richsq. Both of these guys could compete if they just turned up the boost. Infact Alan might even have MORE MODS than Jorge. Ooohhh, no I didn't....
Nice to know where us club members stand.
That's ok though, because I actually got to sit behind the wheel of Jorges car and go "zooooooom, squeeeeelllll, zooooooom, squeeeeellllll, zoooooooooom, chirp, zooooooommmmm" while playing race car driver in my head. Also, I wouldn't count out djniknala or richsq. Both of these guys could compete if they just turned up the boost. Infact Alan might even have MORE MODS than Jorge.
Ooohhh, no I didn't....
09-02-2005 | 07:48 AM
#6
FGC Central Florida BOD
iTrader: (18)
Joined: Aug 2003
Posts: 6,632
Likes: 0
From: tampa palms, tampa, florida
yeh gman has his listed and alan doesnt 
you also took that sig line from alan todd
i have met gman before when i put in his window mod in
gman are you goin to have cprace retune it after you get the exhaust or did they just tune it without an exhaust on your car and then just put it back on?
you also took that sig line from alan todd
i have met gman before when i put in his window mod in
gman are you goin to have cprace retune it after you get the exhaust or did they just tune it without an exhaust on your car and then just put it back on?
09-02-2005 | 08:43 AM
#7
Registered User
Joined: Feb 2004
Posts: 4,184
Likes: 0
I didn't steal my sig from Alan. He just made a comment similar to my sig and I told him that I was going to use it. 
Talk about sig stealing. Do you remember Josh's "PimpinPanhandler's" sig he had forever? I'd say YOU stole his sig Daniel... Donate to my FI fund, please!
Talk about sig stealing. Do you remember Josh's "PimpinPanhandler's" sig he had forever? I'd say YOU stole his sig Daniel... Donate to my FI fund, please!
Trending Topics
09-02-2005 | 08:51 AM
#8
Thread Starter
Registered User
Joined: Sep 2004
Posts: 519
Likes: 0
From: Miami, FL
Originally Posted by Finiti35
Jorge's car is off the chain, nobody can compete with him.. unless your name is G352NV or something. The scary part is that he's been on the forums for a year and nobody has seen him yet Too bad you won't be here on the 17th, but it would be awesome if you can make it up to Towers one night.. I'll be there tomorrow with the Bimmies. Sorry, you won't get me off your back until all of us get to see your car in person! When is your bodykit getting installed? And where's that shop with that 1000hp Z if it's not a secret, I might want to go check it out.
Too bad you won't be here on the 17th, but it would be awesome if you can make it up to Towers one night.. I'll be there tomorrow with the Bimmies. Sorry, you won't get me off your back until all of us get to see your car in person! When is your bodykit getting installed? And where's that shop with that 1000hp Z if it's not a secret, I might want to go check it out.The shop I found is Premiere Auto Techniks in Pembroke Pines. www.premiereauto.com.
As far as the body kit I might wait a month or two to get installed.....my wife is about to divorce me cause of the all the money I have spent on the car. I need to cool down a bit......maybe with next month's bonus check...it is going to be my biggest bonus ever!
Last edited by Gman2004; 09-02-2005 at 09:24 AM.
09-02-2005 | 09:25 AM
#9
Thread Starter
Registered User
Joined: Sep 2004
Posts: 519
Likes: 0
From: Miami, FL
Originally Posted by neffster
Not true Finiti. Jorge seems to be partial to non-FGC members. He took CKY2K (Will) for a ride already.
Nice to know where us club members stand. That's ok though, because I actually got to sit behind the wheel of Jorges car and go "zooooooom, squeeeeelllll, zooooooom, squeeeeellllll, zoooooooooom, chirp, zooooooommmmm" while playing race car driver in my head.
Nice to know where us club members stand.
That's ok though, because I actually got to sit behind the wheel of Jorges car and go "zooooooom, squeeeeelllll, zooooooom, squeeeeellllll, zoooooooooom, chirp, zooooooommmmm" while playing race car driver in my head.
09-02-2005 | 10:38 AM
#13
Thread Starter
Registered User
Joined: Sep 2004
Posts: 519
Likes: 0
From: Miami, FL
Originally Posted by SFLG35
yeh gman has his listed and alan doesnt
you also took that sig line from alan todd
i have met gman before when i put in his window mod in
gman are you goin to have cprace retune it after you get the exhaust or did they just tune it without an exhaust on your car and then just put it back on?
you also took that sig line from alan todd
i have met gman before when i put in his window mod in
gman are you goin to have cprace retune it after you get the exhaust or did they just tune it without an exhaust on your car and then just put it back on?
The car is running rich with my current exhaust so the 3" so lean it up. I will have it checked out when I get the new exhaust.
09-02-2005 | 12:18 PM
#14
Registered User
Joined: Mar 2005
Posts: 650
Likes: 0
From: Ft Hood, TX Yeehaw!
I made up a mod list the other day. I think it's a little much for a sig. As Gman said if I turn my boost up too high(more than 12psi) I can get the radiator overflow to spew. I'm waiting on a few more parts to get that remedied(3" exhaust, Koyo Rad, Greddy Breather tank) Enjoy!
Peformance:
Greddy TT with Front Mount Intercooler
Balanced and blueprinted engine with:
Arias 9.0:1 pistons
Pauter Rods
Jim Wolf Technology S1 Cams
ARP Head, Main and Rod bolts
Ported and polish head
Crawford cast polished plenum
Ceramic coated exhaust manifolds, downpipes and testpipes
Greddy Type RS blowoff valve
Borla True Dual exhaust
RPS clutch and flywheel
AAM fuel system with billet rails
Aeromotive FPR
60lb Seimens Deka injectors
Innovations line lock kit
Electronics:
Greddy Profec B spec 2 boost controller
PLX M300 wideband
Greddy electronic boost gauge
Greddy EGT gauge
J&S Ultrasafeguard with remote knock/wideband
KP technologies VDC memory switch
Other Mods:
Greddy Gracer front bumper
Cottrill Customs rear valence blackout
Hotchkis 3-way adjustable sway bars
Kinetix rear traction and camber arms
Goodridge SS brake lines
Stock brembo brakes with EBC Greenstuff pads
Hifonics Brutus BX1500D
Hifonics Zeus ZX6400
(2) Focal Utopia 165W separates
JL 10W6v2
4080 molded fiberglass box
Kazera KZ-A's 18x8.5 and 18x9.5
BFG G-force TA Drag Radails 265/40/18
Peformance:
Greddy TT with Front Mount Intercooler
Balanced and blueprinted engine with:
Arias 9.0:1 pistons
Pauter Rods
Jim Wolf Technology S1 Cams
ARP Head, Main and Rod bolts
Ported and polish head
Crawford cast polished plenum
Ceramic coated exhaust manifolds, downpipes and testpipes
Greddy Type RS blowoff valve
Borla True Dual exhaust
RPS clutch and flywheel
AAM fuel system with billet rails
Aeromotive FPR
60lb Seimens Deka injectors
Innovations line lock kit
Electronics:
Greddy Profec B spec 2 boost controller
PLX M300 wideband
Greddy electronic boost gauge
Greddy EGT gauge
J&S Ultrasafeguard with remote knock/wideband
KP technologies VDC memory switch
Other Mods:
Greddy Gracer front bumper
Cottrill Customs rear valence blackout
Hotchkis 3-way adjustable sway bars
Kinetix rear traction and camber arms
Goodridge SS brake lines
Stock brembo brakes with EBC Greenstuff pads
Hifonics Brutus BX1500D
Hifonics Zeus ZX6400
(2) Focal Utopia 165W separates
JL 10W6v2
4080 molded fiberglass box
Kazera KZ-A's 18x8.5 and 18x9.5
BFG G-force TA Drag Radails 265/40/18