TelephasicG

Any chance of seeing a dyno sheet and perhaps a video? I also checked your website, no mention of the kit there. Is it for sale?

Waste86

May not be the person you are looking for to answer this, but they are selling the kit. I ordered mine at the beginning of July.

Upscale Speed

iTrader: (18)

How much boost could I run, reliably, on this kit with stock internals and stock 7AT? With exhaust, oil and tranny cooler and Ecutek tuned for supporting mods to start would be my goal.

1cleanG

iTrader: (53)

Any and all Automatics we would HIGHLY recommend an upgraded built transmission with upgraded clutch plates. Personally I have seen forced induction builds on the VQ stock transmission hold around 4-430whp without issues short term(with the transmission cooler), but most of those setups typically lack a desirable torque curve.

Without a boost controller and open waste gate (around 6psi), this kit will already produce that power range with considerably higher torque.

ANMVQ

iTrader: (13)

7-8 PSI, You want to be around 400-430 WHP but the WTRQ you'd want to keep in the low mid 330's.

Upscale Speed

iTrader: (18)

So if I went with a build tranny from say Level 10 how much boost would I be able to run on stock internals safely?

ANMVQ

iTrader: (13)

There's not real answer to that :/ depends on the tune! but I still wouldn't go anymore than 9 maybe 10 PSI, My motor popped on a SC but I was running 12 PSI, Turbos are always hit harder because of the HUGH trq they make.

We also have to worry about the Tcase not sure what the limits are.

1cleanG

iTrader: (53)

We have customers running 10-12psi daily running E85 with zero issues, not even a hiccup.

There are many factors to take into consideration, the two most important would be your fuel system and tune. Your tune & boost controller will control your TQ curves as to when it really comes on hard. A proper fuel setup(upgraded injectors, pump & fuel return system) will prevent the car from leaning out.

Upscale Speed

iTrader: (18)

Thank you.

1cleanG

iTrader: (53)

You bet. I want to point out this thread on the370 page as well which is very helpful, and shows current AT forced induction builds.

Forced Induction & 7AT 370z Info - Nissan 370Z Forum

Please let me know if you have any other questions or if you'd like to start putting a build invoice together~ Happy to help you get setup!

1cleanG

iTrader: (53)

An awesome side by side compilation of OEM 2015 Nismo acceleration vs post install of the Fast Intentions Twin Turbo Stage 2.

claudiohv

Dude amazing shifting skills, I can totally shift like that at 2ooo rpms though.

Cheers for TT Fi kit! No wonder why boost is addicting, may the forced induction be with us all.






Edit: my clutch smells if I shift like that, should I worry? Lmao... No like should I actually worry?

Byrdman

iTrader: (7)

Tony has Top Speed Motorsports contacted you at all about my build? I find it silly that my car is just sitting at their shop and you guys are pumping out kits left and right and TSM doesnt have it yet. So much for being the 1st G after George's build

1cleanG

iTrader: (53)

You've got a PM

FastIntentions

iTrader: (6)

Hey man,hope all is well on your end. Hopefully back from deployment. I have not been contacted by anyone from Top Speed regarding your car since thelast time you and I spoke.

I'm going to send you a PM with my personal cell number.

Thanks.

-Tony