Getting Ready GTM 2SC
#1
Premier Member
Thread Starter
Getting Ready GTM 2SC
Ever since I purchased my 09 G37x I have been looking into FI. When GTM announced the twin SC for the G37x I starting getting the car ready. First thing was to open up the exhaust with the Megan Y pipe and Tanabe midpipe both installed NP. Next was to install a guage to monitor A/F, oil pressure, fuel pressure, oil temp, etc etc. The areoforce guage works perfectly, 1 guage does it all set it to scan and the dual display changes at preset intervals. GTM recomended the valve body upgrade. Turn around time less than a week and after an easy r&r what a difference in shifting .... quick and crisp. Next is the twin SC kit.... updates later.
#3
Administrator
Now that is some interesting stuff you have going on there! In for updates!
#5
Premier Member
Thread Starter
Thanks guys. Gtm has the prices on their website it is around $900. I did the r&r myself to save cost plus the fun factor of doing the work yourself.
#6
Registered User
iTrader: (1)
Sweet! Someone else to take the plunge with me. Car is at GTM's shop right now for the twin SC. Should have some final results in a few months. I'm much more active on the370z site as that's what I own, but I started posting here a bit since this is a revelation for the awd guys. I wanted this so I can keep my LTH's haha. Not sure if I can use links to another forum, but for now.
SS_FireHawk Build Thread - Nissan 370Z Forum
They just ran a baseline a few days ago. Funny how I have Tanabe as well. I don't see a lot of guys run it, but with the mid pipe have the same mounting points as stock, it makes it a great upgrade. I'll be watching your build, GL
SS_FireHawk Build Thread - Nissan 370Z Forum
They just ran a baseline a few days ago. Funny how I have Tanabe as well. I don't see a lot of guys run it, but with the mid pipe have the same mounting points as stock, it makes it a great upgrade. I'll be watching your build, GL
#7
Premier Member
Thread Starter
^^^^ LOL I saw your vid about your car transport almost took out the Tanabe. I like the sound it gives the car. A little attitude without going over the top. With the 2SC kit it will sure have the WOW factor. GL to you as well.
Trending Topics
#8
Premier Member
Thread Starter
Just a quick update on the the GTM valve body upgrade. Love the way it shifts especially is DS/Manuel mode. Instantly shifts from gear to gear no lag at all. For those that like to DIY you will need these 2 items (pump $13 and a valve attachment $12) to pump the trans oil back into the transmission once the pan is back on. New gasket of course.
#9
Premier Member
Thread Starter
Next up is a J&S Safeguard Intercepter .... individual cyl knock contoller. As everyone knows boost is adictive and knock must be controlled or engines go BOOM! Pictures coming.
#10
#12
Premier Member
Thread Starter
#14
Premier Member
Thread Starter
To install the J&S Safeguard I wanted to have it accessible yet out of the way so I picked the glove box as it is close the the ECU as well.
Then I wanted to have the wiring harness plug and play so that I could remove and go back to stock in a matter of minutes.
Here it is all installed. Close the glove box and everything is out of the way.
Then I wanted to have the wiring harness plug and play so that I could remove and go back to stock in a matter of minutes.
Here it is all installed. Close the glove box and everything is out of the way.
Last edited by timp; 01-20-2013 at 11:44 PM. Reason: spelling