Help Broke Down
#31
Registered Member
Thread Starter
iTrader: (13)
Yes it does, Every single person running this kit beware, Anyone who washes their engine( IF it even did this once I would have wrapped a bag around it anyway) anyone with a CF hood with vents beware you will at some point get water in it and it will contaminate the SC Fluid. It doesnt help that the vent hole is on a plug that sits in a hole so water can puddle up there.
#33
Registered Member
Thread Starter
iTrader: (13)
They really can't, I really did not agrue to much on the phone as I'm sitting at my desk, I guess they would just sit on I had to wash the car or something but really what kinda design is that , It out in the open in the engine bay so anything could get in there, Would have to be very small or liquid as we are finding out. I have to call then back at 5PM(1.5 hrs from now) I will get into a little on how can you prove I washed it? They cant, We see, what happens.
#35
Registered Member
Thread Starter
iTrader: (13)
1000% agree, I was going to build I sheild for the whole thing, But the SC let go, I still have the sheet metal in a home depot bag in the trunk.I was worried about the the belt getting wet and slipping off, Not he damn SC to have a hole in it? :/
#38
Registered User
iTrader: (1)
It is there, on one of the brass caps on top of the SC. It is really small though. I dont know how you could get enough water through that hole to force out any of the lubricant and do any damage because it is so small. Maybe if you pressure washed the engine and sprayed right into the hole but it doesn't sound like that is the case here.
You might be able to find a small rubber plug that fits in with just enough tension to hold it and keep out water but loose enough to blow out if you happened to overfill when changing fluid.
I will take a look at mine when I get home but I know the hole is there as the unit was overfilled from the factory and spewed out a little fluid when it was frist spun up after installation. The hole was so small that the tech working on the install did not know it was there and thought that the plug was not sealing at first. I just changed the fluid a few weeks ago and it did not have any water in it. We were real careful to not overfill as cleaning up the blowout was a pain the first time.
You might be able to find a small rubber plug that fits in with just enough tension to hold it and keep out water but loose enough to blow out if you happened to overfill when changing fluid.
I will take a look at mine when I get home but I know the hole is there as the unit was overfilled from the factory and spewed out a little fluid when it was frist spun up after installation. The hole was so small that the tech working on the install did not know it was there and thought that the plug was not sealing at first. I just changed the fluid a few weeks ago and it did not have any water in it. We were real careful to not overfill as cleaning up the blowout was a pain the first time.
#39
Registered User
iTrader: (10)
It is there, on one of the brass caps on top of the SC. It is really small though. I dont know how you could get enough water through that hole to force out any of the lubricant and do any damage because it is so small. Maybe if you pressure washed the engine and sprayed right into the hole but it doesn't sound like that is the case here.
You might be able to find a small rubber plug that fits in with just enough tension to hold it and keep out water but loose enough to blow out if you happened to overfill when changing fluid.
I will take a look at mine when I get home but I know the hole is there as the unit was overfilled from the factory and spewed out a little fluid when it was frist spun up after installation. The hole was so small that the tech working on the install did not know it was there and thought that the plug was not sealing at first. I just changed the fluid a few weeks ago and it did not have any water in it. We were real careful to not overfill as cleaning up the blowout was a pain the first time.
You might be able to find a small rubber plug that fits in with just enough tension to hold it and keep out water but loose enough to blow out if you happened to overfill when changing fluid.
I will take a look at mine when I get home but I know the hole is there as the unit was overfilled from the factory and spewed out a little fluid when it was frist spun up after installation. The hole was so small that the tech working on the install did not know it was there and thought that the plug was not sealing at first. I just changed the fluid a few weeks ago and it did not have any water in it. We were real careful to not overfill as cleaning up the blowout was a pain the first time.
#41
Registered Member
Thread Starter
iTrader: (13)
I also did talk at length with them today about how this child happen kinda pushing for warranty as even vortech has never heard of This happening, like a one off? But if that's the case why not warranty it? We'll see what they say tomorrow.