Any modified 7 speed Auto transmissions? Experiences please!
#32
Registered Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Long Island, NY
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
#33
Can Sam from GTM and/or the person who has the Stage 4 transmission please give some answers and feedback on the Stage 4 transmission? What does it drive like under light to midrange load? When the Stage 4 transmission mod is performed do any values have to be changed within torque management settings or are those just left alone since the transmission is modified internally? What's the maximum TQ/HP this transmission is expected to handle? Is there anything else that must be modified? How long is the turnaround time for the Stage 4 transmission modification?
No torque management tables were modified. This trans will take 700+ RWTQ no problem . HP Numbers are not a that important in building a Trans, it is all about torque.
Currently we have 4 orders for a stage 4 units so turned around time right now is 4-6 weeks, it will get better once we catch up with the current orders .
Sam
#34
Update on the 7AT with VB upgrade.
The tranny remains strong with improved shift speed. I do notice some hesitation when shifting at slower speeds from 1st to 2nd and from 2nd to 3rd.
Their is no pronounced problems with the slow shifting. Fast acceleration is great!
It may be a perfecting of the programming, or I may have to live with higher top-end performance = less low end comfort/smoothness.
We will see how it comes
The tranny remains strong with improved shift speed. I do notice some hesitation when shifting at slower speeds from 1st to 2nd and from 2nd to 3rd.
Their is no pronounced problems with the slow shifting. Fast acceleration is great!
It may be a perfecting of the programming, or I may have to live with higher top-end performance = less low end comfort/smoothness.
We will see how it comes
#35
Update on the 7AT with VB upgrade.
The tranny remains strong with improved shift speed. I do notice some hesitation when shifting at slower speeds from 1st to 2nd and from 2nd to 3rd.
Their is no pronounced problems with the slow shifting. Fast acceleration is great!
It may be a perfecting of the programming, or I may have to live with higher top-end performance = less low end comfort/smoothness.
We will see how it comes
The tranny remains strong with improved shift speed. I do notice some hesitation when shifting at slower speeds from 1st to 2nd and from 2nd to 3rd.
Their is no pronounced problems with the slow shifting. Fast acceleration is great!
It may be a perfecting of the programming, or I may have to live with higher top-end performance = less low end comfort/smoothness.
We will see how it comes
#36
#37
Did the guy's @ GTM Tighten the VB more for you to get faster shift response?
#38
The car still hits redline/fuel cutoff/limiter from 1st to 2nd. The amount of power pushin the wheels when I hit 5k RPM makes the engine rev so fast the tranny can't shift fast enough and I get a auto cutoff. This means I have to shift manually from 1st to 2nd Allways. Or I could let off the pedal! But that's not my style.
I'm hoping I can figure out how to move the shift point down to around 5.5k RPM in 1st. I'm not sure if it's possible, but it would likely give the tranny time to shift before hitting redline/limiter.
(Does anyone know if this is possible? Maybe uprev or tranny software?)
I'm also experiencing some hesitation at low speeds from 2nd to 3rd. I chalk it up to the fact that the tranny can only do so many things (can't be a race tranny and a smooth street car at the same time)?
#39
Registered User
Even in the 5-speed, this is my experience. I HAVE to shift manually, and well beforehand. Otherwise it's into that cutoff area and then slowly get back into the powerband.
At the track you lose about three-four tenths because of this.
The day someone hacks the trans ECU for speed and response is the day we rejoice!
Coop
At the track you lose about three-four tenths because of this.
The day someone hacks the trans ECU for speed and response is the day we rejoice!
Coop
#40
The VB was "tightened/firmed up" from the initial settings. So far I am much happier with the firmness of shifts in all modes (DS/D/M).
The car still hits redline/fuel cutoff/limiter from 1st to 2nd. The amount of power pushin the wheels when I hit 5k RPM makes the engine rev so fast the tranny can't shift fast enough and I get a auto cutoff. This means I have to shift manually from 1st to 2nd Allways. Or I could let off the pedal! But that's not my style.
I'm hoping I can figure out how to move the shift point down to around 5.5k RPM in 1st. I'm not sure if it's possible, but it would likely give the tranny time to shift before hitting redline/limiter.
(Does anyone know if this is possible? Maybe uprev or tranny software?)
I'm also experiencing some hesitation at low speeds from 2nd to 3rd. I chalk it up to the fact that the tranny can only do so many things (can't be a race tranny and a smooth street car at the same time)?
The car still hits redline/fuel cutoff/limiter from 1st to 2nd. The amount of power pushin the wheels when I hit 5k RPM makes the engine rev so fast the tranny can't shift fast enough and I get a auto cutoff. This means I have to shift manually from 1st to 2nd Allways. Or I could let off the pedal! But that's not my style.
I'm hoping I can figure out how to move the shift point down to around 5.5k RPM in 1st. I'm not sure if it's possible, but it would likely give the tranny time to shift before hitting redline/limiter.
(Does anyone know if this is possible? Maybe uprev or tranny software?)
I'm also experiencing some hesitation at low speeds from 2nd to 3rd. I chalk it up to the fact that the tranny can only do so many things (can't be a race tranny and a smooth street car at the same time)?
Thanks for the reply!! The hesitation that you experiencing from 2 to 3 gear prompts to ask about what RPM range are you in when you feel a slight hiccup?
Has that problem existed before you delve into the F.I. World or did this occur after and if not then when did you start noticing the shift delay?
#41
Thanks for the reply!! The hesitation that you experiencing from 2 to 3 gear prompts to ask about what RPM range are you in when you feel a slight hiccup?
Has that problem existed before you delve into the F.I. World or did this occur after and if not then when did you start noticing the shift delay?
Has that problem existed before you delve into the F.I. World or did this occur after and if not then when did you start noticing the shift delay?
#43
Even in the 5-speed, this is my experience. I HAVE to shift manually, and well beforehand. Otherwise it's into that cutoff area and then slowly get back into the powerband.
At the track you lose about three-four tenths because of this.
The day someone hacks the trans ECU for speed and response is the day we rejoice!
Coop
At the track you lose about three-four tenths because of this.
The day someone hacks the trans ECU for speed and response is the day we rejoice!
Coop
Sam said the only solution for my IPL was a built AT.
Someday I may go there, but that's a lotta dough! I'll probably wait till I try to push 600 or more WHP to invest that kind of $$$ in the trans.
Thread
Thread Starter
Forum
Replies
Last Post
redlinernyc
Engine, Drivetrain & Forced-Induction
10
02-29-2016 11:06 PM
KZK
Canada
0
09-02-2015 05:30 AM