Gas pedal - no response
#16
Case updated
Funny thing is I'm dealing with something similar.
Had a throttle code
P2101 Electronic Throttle Control Function
P1226 Closed throttle function
P1235 Closed throttle function
Did a throttle pedal dance, developed a
P010B Throttle -“Mass or Volume Air Flow “B” Circuit Range/Performance.
Changed MAFs due to one reading .20v off
Switched TBs, entered high idle, pedal dance gave me a smooth idle again however it still feels slow. Like many here I an extremely slow acceleration which goes away after 3500RPMs. From that point it revs up but not "tire breaking pull" like it should.
Have not driven it since, it does have broken flex pipes with a decent exhaust leak but after AF and O2 sensors.
Had a throttle code
P2101 Electronic Throttle Control Function
P1226 Closed throttle function
P1235 Closed throttle function
Did a throttle pedal dance, developed a
P010B Throttle -“Mass or Volume Air Flow “B” Circuit Range/Performance.
Changed MAFs due to one reading .20v off
Switched TBs, entered high idle, pedal dance gave me a smooth idle again however it still feels slow. Like many here I an extremely slow acceleration which goes away after 3500RPMs. From that point it revs up but not "tire breaking pull" like it should.
Have not driven it since, it does have broken flex pipes with a decent exhaust leak but after AF and O2 sensors.
the gas pedal goes off suddenly and when i try to switch to Ds it still reads D ...Dtc show error of incorrect gear ratio and incorrect 5th gear ratio
#17
Moderador
Your issue is transmission related. Almost 90% of the times you get an incorrect gear ratio code means the TCM located inside of the trasmission.
#18
so man what do you think that i should look out to check ? Selonoids ? TCM? I’m from middle east not from USA and thx already for the help
#19
Moderador
Thread
Thread Starter
Forum
Replies
Last Post
Roman G
Engine, Drivetrain & Forced-Induction
4
04-23-2013 06:16 PM