Oil cooler
08-18-2010 | 09:51 PM
#16
Thread Starter
Registered User
Joined: Jan 2010
Posts: 428
Likes: 0
there is no oil temperature gauge for our cars. only thing that's on your dash is you your water/coolant guage. you'll know for sure when your engine is way too hot cuz your ecu will throw you into limp mode.
i would recommend a 25 row oil cooler if you do some tracking. 19 row will be good enough to run it hard once in a while. idk if you're willing to fork out 700-800 for the Nissan oil cooler when you can get a cheaper kit that works the same for a lot less lol. installing a oil cooler will not void warranty unless your dealership are ******. good luck with it!
i would recommend a 25 row oil cooler if you do some tracking. 19 row will be good enough to run it hard once in a while. idk if you're willing to fork out 700-800 for the Nissan oil cooler when you can get a cheaper kit that works the same for a lot less lol. installing a oil cooler will not void warranty unless your dealership are ******. good luck with it!
08-18-2010 | 09:57 PM
#17
how it works is there's a sandwich plate that screws onto your existing oil filter location and the oil filter will screw onto the sandwich plate. there's 2 fittings on the sandwich plate which will divert oil to go through the cooler lines into the cooler and forced back from the cooler to your filter, it's pressurized so it'll circulate fine. check out my oil cooler installed thread so you can get a rough idea of how it's installed.
08-19-2010 | 01:52 AM
#18
Registered User
Joined: Feb 2009
Posts: 1,002
Likes: 1
From: San Jose, CA
$419.50 for 19 row from Stillen
$529.00 for 25 row Stillen race version
$419.50 for GTM
$589 GTM COMPETITION OIL COOLER FOR VQ
z1 motorsports
19 row $398
25 row $498
34 row $598
Oil Sandwich Plate Adapter add +40
if you have an automatic..doesnt hurt to get a Tranny cooler as well
$529.00 for 25 row Stillen race version
$419.50 for GTM
$589 GTM COMPETITION OIL COOLER FOR VQ
z1 motorsports
19 row $398
25 row $498
34 row $598
Oil Sandwich Plate Adapter add +40
if you have an automatic..doesnt hurt to get a Tranny cooler as well
08-19-2010 | 10:07 AM
#19
Registered User
Joined: Jan 2010
Posts: 85
Likes: 0
From: Kansas City
I was just reading through this the other day:
Modshack DIY: Oil Cooler (scratch built install, lottsa pics).....>. - Nissan 370Z Forum
You will probably have to modify your install a bit for the G37 but all the components will be the same, except for maybe hose lengths of course. But looks like you can DIY for around $300. I'll be doing it this winter.
Modshack DIY: Oil Cooler (scratch built install, lottsa pics).....>. - Nissan 370Z Forum
You will probably have to modify your install a bit for the G37 but all the components will be the same, except for maybe hose lengths of course. But looks like you can DIY for around $300. I'll be doing it this winter.
08-19-2010 | 10:38 AM
#20
I was just reading through this the other day:
Modshack DIY: Oil Cooler (scratch built install, lottsa pics).....>. - Nissan 370Z Forum
You will probably have to modify your install a bit for the G37 but all the components will be the same, except for maybe hose lengths of course. But looks like you can DIY for around $300. I'll be doing it this winter.
Modshack DIY: Oil Cooler (scratch built install, lottsa pics).....>. - Nissan 370Z Forum
You will probably have to modify your install a bit for the G37 but all the components will be the same, except for maybe hose lengths of course. But looks like you can DIY for around $300. I'll be doing it this winter.
. How did i forget
08-19-2010 | 04:22 PM
#24
Registered User
Joined: Jan 2010
Posts: 85
Likes: 0
From: Kansas City
^^^^ That lol. I'm not doing anymore track days this summer so I can wait till there is snow on the ground to tear it apart again. Coilovers, oil cooler, maybe intake and exhaust are coming this winter.
08-19-2010 | 11:18 PM
#25
Thread
Thread Starter
Forum
Replies
Last Post
4DRZ
Engine, Drivetrain & Forced-Induction
10
10-02-2015 10:54 AM
Junchao Sun
Engine, Drivetrain & Forced-Induction
25
10-01-2015 01:41 PM
