Engine Internals
#62
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
y'all can hate on me all you want, ill make a deal with you, if i dont have a custom one turbo setup in 1-2 years (yah now im gonna get bagged on for sucha large time span right?), you can say what you want about me and my ideas and i wont defend myself at all, just sit there and take it.
#63
Administrator
They're not hating man.. they're just surprised how a turbo kit that costs around $8k is being sold to you for $700, man that's cheaper than exhaust mufflers if you havent noticed.
You sure it's legit? Can you get us more info on it?
You sure it's legit? Can you get us more info on it?
#64
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
hmmm haha alright. and im going to be out of down during the next meet, so monday after next i will have more information, ill ask what kind and everything. but remember, this is JUST the turbo, its going to be a custom kit.
#65
Administrator
Oh it's just the Turbo? A single one??
Oh you're in for some adventures my man lol
Oh you're in for some adventures my man lol
#66
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
to make it a full "kit" what all is needed such as a manifold and intercooler. fuel injectors? or what? (i know the list is pretty long)
all in all, this is going to be done hopefully in 1-2years and i should be running 12 lbs of boost. its a little project i've decided i want to take on and it should be super fun, minus the headaches ill run into
#67
Administrator
Trying to route two exhaust headers to one turbo is going to require a lot of piping (if possible) it was done on the VQ35 by APS and it wasn't the best option out there. Their pipes had to run around the transmission basically and it was a disaster. It was also quite laggy (both in terms of throttle response and spooling) as the turbo was quite far from the exhaust charge. Trust me, a custom job is not something you want to go into as companies out there spent lots of thousands of dollars on R&D to make their kits happen.
This isn't a plug and play mod, you need to read a lot about it and about that "long list", the headache is not worth the outcome if you ask me
This isn't a plug and play mod, you need to read a lot about it and about that "long list", the headache is not worth the outcome if you ask me
#68
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Trying to route two exhaust headers to one turbo is going to require a lot of piping (if possible) it was done on the VQ35 by APS and it wasn't the best option out there. Their pipes had to run around the transmission basically and it was a disaster. It was also quite laggy (both in terms of throttle response and spooling) as the turbo was quite far from the exhaust charge. Trust me, a custom job is not something you want to go into as companies out there spent lots of thousands of dollars on R&D to make their kits happen.
This isn't a plug and play mod, you need to read a lot about it and about that "long list", the headache is not worth the outcome if you ask me
This isn't a plug and play mod, you need to read a lot about it and about that "long list", the headache is not worth the outcome if you ask me
#69
Registered User
Join Date: Aug 2009
Location: Saint charles, Missouri
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
y'all can hate on me all you want, ill make a deal with you, if i dont have a custom one turbo setup in 1-2 years (yah now im gonna get bagged on for sucha large time span right?), you can say what you want about me and my ideas and i wont defend myself at all, just sit there and take it.
And it brings up a huge red flag when you are getting someone's old kit for 700 bucks. Cutting corners and overlooking the big picture is not the way to go. It will cost you ALOT of headache doing that.
Your best bet is to call sam@GTM and talk to him about what your plan is.
Whats your power goal? is this a daily driver? reliability? it all comes into play when deciding to jump into F/I. I wish I would have done alot more research before pulling the trigger
#70
Administrator
Curious, what car does your friend have this single turbo on?
#72
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
You have to understand that what your talking about is not just a simply project that you can throw a couple of pipes together to make it work. Theres a reason there is no single turbo kits for our cars. Im a big fan of the single turbo systems, dont get me wrong but what your looking at doing is something I dont think can be reached.
And it brings up a huge red flag when you are getting someone's old kit for 700 bucks. Cutting corners and overlooking the big picture is not the way to go. It will cost you ALOT of headache doing that.
Your best bet is to call sam@GTM and talk to him about what your plan is.
Whats your power goal? is this a daily driver? reliability? it all comes into play when deciding to jump into F/I. I wish I would have done alot more research before pulling the trigger
And it brings up a huge red flag when you are getting someone's old kit for 700 bucks. Cutting corners and overlooking the big picture is not the way to go. It will cost you ALOT of headache doing that.
Your best bet is to call sam@GTM and talk to him about what your plan is.
Whats your power goal? is this a daily driver? reliability? it all comes into play when deciding to jump into F/I. I wish I would have done alot more research before pulling the trigger
g37
#74
Registered User
Join Date: Aug 2009
Location: Saint charles, Missouri
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
#75
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Dallas, TX
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
hahaha i didnt even think about taking any, i can next time i see him. but he also has a custom crate engine and all sorts of **** so that the single turbo can work.
so thats a yes then, once at stage 1 if i wasnt happy i could just upgrade the turbos, could i not?
so thats a yes then, once at stage 1 if i wasnt happy i could just upgrade the turbos, could i not?