FI Preparation...
#1
FI Preparation...
What will you guys do first before going FI.
let me start...i'm doing digital gauges first. just received my HKS camp 2 along with my navtool. will be installing it this weekend but too bad i don't have enough $$$ to get the r/f unit and sensors that'll come next along with a oil cooler.
enjoy! more pic's to come this weekend when i'm finished installing it.
let me start...i'm doing digital gauges first. just received my HKS camp 2 along with my navtool. will be installing it this weekend but too bad i don't have enough $$$ to get the r/f unit and sensors that'll come next along with a oil cooler.
enjoy! more pic's to come this weekend when i'm finished installing it.
#5
Registered User
Join Date: Apr 2010
Location: Bay Area, CA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I had a question about the oil cooler... Like a turbo, the Vortec charger is oil cooled, this in turn adds a significant temperature increase to the stock oil tems without additional cooling.
However, the Rotrex charger comes with its own sealed cooling system with special "Traction Fluid" used for cooling as well.
Would the Rotrex system require any additional engine oil cooling? I wouldnt imagine it would need any more than the stock motor would.
Looks like you have the engine monitoring covered. I still think a boost gauge, a cheap laptop, and software with an OBD cable is more than sufficient.
Weiboy, are you already Uprev tuned, and is there really any benefit on tuning pre-SC?
However, the Rotrex charger comes with its own sealed cooling system with special "Traction Fluid" used for cooling as well.
Would the Rotrex system require any additional engine oil cooling? I wouldnt imagine it would need any more than the stock motor would.
Looks like you have the engine monitoring covered. I still think a boost gauge, a cheap laptop, and software with an OBD cable is more than sufficient.
Weiboy, are you already Uprev tuned, and is there really any benefit on tuning pre-SC?
#7
Registered User
Join Date: Apr 2010
Location: Bay Area, CA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, is the GTM oil cooler comprised of the same parts as the oil filter relocation in their supercharger kit (minus the cooler)? I wonder if there's enough space up front for the IC, the Traction Fluid Cooler and the oil cooler with the GTM kit.
Last edited by itisagoodname; 05-21-2010 at 02:50 AM.
Trending Topics
#8
I had a question about the oil cooler... Like a turbo, the Vortec charger is oil cooled, this in turn adds a significant temperature increase to the stock oil tems without additional cooling.
However, the Rotrex charger comes with its own sealed cooling system with special "Traction Fluid" used for cooling as well.
Would the Rotrex system require any additional engine oil cooling? I wouldnt imagine it would need any more than the stock motor would.
Looks like you have the engine monitoring covered. I still think a boost gauge, a cheap laptop, and software with an OBD cable is more than sufficient.
Weiboy, are you already Uprev tuned, and is there really any benefit on tuning pre-SC?
However, the Rotrex charger comes with its own sealed cooling system with special "Traction Fluid" used for cooling as well.
Would the Rotrex system require any additional engine oil cooling? I wouldnt imagine it would need any more than the stock motor would.
Looks like you have the engine monitoring covered. I still think a boost gauge, a cheap laptop, and software with an OBD cable is more than sufficient.
Weiboy, are you already Uprev tuned, and is there really any benefit on tuning pre-SC?
#9
Registered User
yup, the V3 oil does not mix with the engine oil. That's the best thing about both SC systems IMO. Not to mention the fact that you don't have to permanently modify the stock oiling system.
As for me, I'm going to get an SC kit when my warranty is up which is April 2011.
However from now until then, I'm planning on the following
- Sport bumper (need the larger center section for IC )
- Engine oil cooler
- A/T oil cooler
- Transgo VB upgrade
- Monitoring system (maybe Magden M1b or a small separate screen like the Greddy Info-Touch)
OP, how are you planning on getting your AFR readings from the CAMP 2?
As for me, I'm going to get an SC kit when my warranty is up which is April 2011.
However from now until then, I'm planning on the following
- Sport bumper (need the larger center section for IC )
- Engine oil cooler
- A/T oil cooler
- Transgo VB upgrade
- Monitoring system (maybe Magden M1b or a small separate screen like the Greddy Info-Touch)
OP, how are you planning on getting your AFR readings from the CAMP 2?
#10
yup, the V3 oil does not mix with the engine oil. That's the best thing about both SC systems IMO. Not to mention the fact that you don't have to permanently modify the stock oiling system.
As for me, I'm going to get an SC kit when my warranty is up which is April 2011.
However from now until then, I'm planning on the following
- Sport bumper (need the larger center section for IC )
- Engine oil cooler
- A/T oil cooler
- Transgo VB upgrade
- Monitoring system (maybe Magden M1b or a small separate screen like the Greddy Info-Touch)
OP, how are you planning on getting your AFR readings from the CAMP 2?
As for me, I'm going to get an SC kit when my warranty is up which is April 2011.
However from now until then, I'm planning on the following
- Sport bumper (need the larger center section for IC )
- Engine oil cooler
- A/T oil cooler
- Transgo VB upgrade
- Monitoring system (maybe Magden M1b or a small separate screen like the Greddy Info-Touch)
OP, how are you planning on getting your AFR readings from the CAMP 2?
this HKS camp 2 is not compatible with A/F unless i have FCON which isn't an option for me lol. so i'll be installing a analog A/F.
Vortech is the way to go if you wanna go SC.
#12
Registered User
Personally I prefer the Rotrex unit over the Vortech. Every review I've read that compares the two prefers the Rotrex unit. Either way, they're both great systems IMO. It's just a matter of which type of cooling/tuning/etc you prefer to go with.
If I could find a used Magden for sale then I'll be getting that, otherwise I'll get a Greddy unit and mount it between the a-pillar and steering.
If I could find a used Magden for sale then I'll be getting that, otherwise I'll get a Greddy unit and mount it between the a-pillar and steering.
#13
Personally I prefer the Rotrex unit over the Vortech. Every review I've read that compares the two prefers the Rotrex unit. Either way, they're both great systems IMO. It's just a matter of which type of cooling/tuning/etc you prefer to go with.
If I could find a used Magden for sale then I'll be getting that, otherwise I'll get a Greddy unit and mount it between the a-pillar and steering.
If I could find a used Magden for sale then I'll be getting that, otherwise I'll get a Greddy unit and mount it between the a-pillar and steering.