When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just found out that the Greddy does not support ECU A/F readings
So lets see...
HKS Camp 2 - No AFR except with F-Con
Greddy Infotouch - No AFR for V36
Magden - Discontinued
Blitz R-Vit I-Color - May or may not view AFR.
what other choose do we have for monitoring systems?
not much options to choose except to go all analog with a custom pillar pod. i really like the CAMP 2 though. you can set warnings for everything. a red light blinks if you go over a certain rpm, boost, temp, voltage, egt, speed. everything you have in there you can set a warning point. so far i'm very happy with it and best of all is i'm not using my AUX to view it so that means i can still play my music while it's on CAMP 2. just a flip of the switch the screen will go back to normal.
... i'm not using my AUX to view it so that means i can still play my music while it's on CAMP 2.
The CAMP2 doesn't have RGB outputs so you have to go through the AUX inputs. If you can hear audio while the CAMP2 is up, you'd first have to convert the signal to RGB. Only then you can go direct to your LCD.
The CAMP2 doesn't have RGB outputs so you have to go through the AUX inputs. If you can hear audio while the CAMP2 is up, you'd first have to convert the signal to RGB. Only then you can go direct to your LCD.
i bought a module that bypassed the nav screen. what it is, is this module comes with a video input and a RGB output to my nav screen. a piggy back. i am not interfering with my car's audio system. i'm only borrowing my nav screen.
Wei, will you PM me exactly what all you purchased along wit the CAMP 2? I'm thinking off going the exact some route myself. Any info about your install would be great too.
me 3!! I guess I'll just settle with the CAMP 2 and get me an AFR gauge.
Problem is I don't have the AUX, just the A/V inputs. Man i want the USB option from the 2010 models!
me 3!! I guess I'll just settle with the CAMP 2 and get me an AFR gauge.
Problem is I don't have the AUX, just the A/V inputs. Man i want the USB option from the 2010 models!
you do have the aux mode. you can connect your a/v from you camp 2 and run it inside your center console to the a/v inputs. but you have to do something else to make it work properly. very easy diy! pm me if you want more info about that.