Hypertech Max Energy Sport...just got it
#32
Registered Member
iTrader: (3)
Got the Hypertech today, but unfortunately I'm one of the ones with the newer build ecu, wasn't able to flash the car. Ran the updater again and emailed off my car's info to the company. Gave them a ring on the tech support line and was told to wait a day or so. Apparently Hypertech says the Nissans/Infinitis are very easy to update the maps to, so it shouldn't take too long.
#33
Registered User
iTrader: (7)
Got the Hypertech today, but unfortunately I'm one of the ones with the newer build ecu, wasn't able to flash the car. Ran the updater again and emailed off my car's info to the company. Gave them a ring on the tech support line and was told to wait a day or so. Apparently Hypertech says the Nissans/Infinitis are very easy to update the maps to, so it shouldn't take too long.
#34
Registered Member
iTrader: (3)
My buddy who owns a 370Z just bought one as well and flashed this AM. Very preliminary impressions he said the throttle response with the 0-60 restriction was much improved, was able to turn the traction control slip light on much more often. Said the power seems to be more in the lower rpm range and is definitely more responsive. He hasn't really ran her hard yet, but will most likely do that in the next few days to get an idea. I can't wait until they release the update for my car!
#35
Registered Member
iTrader: (3)
One thing making me hesitate... there haven't been any "official" updates to this thing on their website in close to a year...
Software Downloads - Hypertech
If they have newer "firmware" available, I don't see why they can't put it up in the support section...
Software Downloads - Hypertech
If they have newer "firmware" available, I don't see why they can't put it up in the support section...
#36
Registered Member
iTrader: (2)
I was kind of concerned about this too, but the date is only for the updater program itself and not the firmware maps. I called them today because the unit didn't support my car's ecu out of the box. They told me they will work on my calibration and upload it to their servers so I can just run their software updater and pull down the file once it's done. The more folks who purchase the programmer, the larger their database of calibrations will become.
#37
Registered Member
iTrader: (5)
I was kind of concerned about this too, but the date is only for the updater program itself and not the firmware maps. I called them today because the unit didn't support my car's ecu out of the box. They told me they will work on my calibration and upload it to their servers so I can just run their software updater and pull down the file once it's done. The more folks who purchase the programmer, the larger their database of calibrations will become.
I too am curious how you go about having them calibrate the unit. I'm assuming you have to pull something from the Hypertech, email it to them, and they calibrate/update it etc.
They really need to be more clear how exactly everything works on their website.
Unless Cobb updates their AP to work with the 7AT, I will definitely be getting this in the future.
#39
Registered Member
iTrader: (5)
You need at least 10 regular forum posts to start your own thread I think.
You can start here!
https://www.myg37.com/forums/newbie-corner-337/
Welcome!
You can start here!
https://www.myg37.com/forums/newbie-corner-337/
Welcome!
#44
Banned
iTrader: (26)
Once the finish all the testing, they will decide then which one they will add MAPS for. Hopefully all of them
Once the intakes testings are done, they will do some with different Cat back exhaust