Hypertech Max Energy Sport...just got it
03-02-2011, 09:18 AM
#406
Registered Member
iTrader: (13)
The only thing I wish the would also change, ( Along with update for intake,Exhasut0 Is the top speed limit.. I know most of us will never hit 158 MPH but to be able to move it up to 185 MPH would be nice.. I was able to do that on my MS3 with the HT and the one time I raced my 08 G35 I was walked by a MS3 at 155 because my car stopped and he had the HT. 
..
Customer service, I shot them an email 3 days ago an still got no anwser?
.. Customer service, I shot them an email 3 days ago an still got no anwser?
03-02-2011, 11:12 AM
#407
Registered User
Join Date: Feb 2011
Location: Portland, OR
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
That's weird, they've responded to all my inquiries within ~24 hours. Unless it was the weekend.
Btw, does anyone know if I adjust the rev limit if it might help with the hesitation/lag I get when accelerating from ~22mph?
Maybe its just me, but I am able to re-create it 100% of the time. Accelerate to 30mph, let it coast down to 22-23 mph, then hit the gas. It's almost like its shifting into too high of a gear and you fall to 0 torque and nothing happens for about a second.
I thought if maybe I bumped up the rev limit by like 100-200 rpms it'd be a negligible mpg hit, but might shrink the window in which this happens? I may be mis-understanding what the rev limit actually does, I'm kind of a novice.
Btw, does anyone know if I adjust the rev limit if it might help with the hesitation/lag I get when accelerating from ~22mph?
Maybe its just me, but I am able to re-create it 100% of the time. Accelerate to 30mph, let it coast down to 22-23 mph, then hit the gas. It's almost like its shifting into too high of a gear and you fall to 0 torque and nothing happens for about a second.
I thought if maybe I bumped up the rev limit by like 100-200 rpms it'd be a negligible mpg hit, but might shrink the window in which this happens? I may be mis-understanding what the rev limit actually does, I'm kind of a novice.
03-02-2011, 09:40 PM
#410
Registered User
I'm betting the issue here is not that they can't do it, it's that they won't do it. They want this tune to be safe and not get a rep with people damaging thier engines. Not that this would actually happen if they did, they'd just be introducing risk by exceeding the spec they could be held liable for.
03-02-2011, 10:26 PM
#411
Yeah my bad stating rev limit can be increased. They have told me in the past that they don't feel it's safe to increase the rev limit. VVEL yadda yadda. For a canned tune though, this thing us great. Since the 7AT TSB, it's even smoother and more linear now.
03-03-2011, 08:33 AM
#413
Registered Member
iTrader: (13)
I would guess this is the same for the G37 Description: 2011 INFINITI G25; VOLUNTARY SERVICE CAMPAIGN ENGINE CONTROL MODULE (ECM) REPROGRAMMING
Due to a software irregularity on certain model year 2011 G25 vehicles, the Engine Control Module (ECM) may incorrectly store a Diagnostic Trouble Code (DTC P0101 and/or P010B) for the Mass Air Flow Sensor and turn ON the Service Engine Soon light on the instrument panel. If DTC P0101 and/or P010B is stored in the ECM, the ECM will limit the engine power until a repair is complete. To remedy this potential condition, Infiniti is conducting this voluntary service campaign to reprogram the ECM at no charge for parts or labor.
To check it out, rate it or add comments, visit ITB10-068 Recall
The comments you make there will appear in the posts below.
Follow this link also , Looks like a TSB..
http://www.infinitig37.com/TSB/ITB09-028.pdf
Due to a software irregularity on certain model year 2011 G25 vehicles, the Engine Control Module (ECM) may incorrectly store a Diagnostic Trouble Code (DTC P0101 and/or P010B) for the Mass Air Flow Sensor and turn ON the Service Engine Soon light on the instrument panel. If DTC P0101 and/or P010B is stored in the ECM, the ECM will limit the engine power until a repair is complete. To remedy this potential condition, Infiniti is conducting this voluntary service campaign to reprogram the ECM at no charge for parts or labor.
To check it out, rate it or add comments, visit ITB10-068 Recall
The comments you make there will appear in the posts below.
Follow this link also , Looks like a TSB..
http://www.infinitig37.com/TSB/ITB09-028.pdf
03-03-2011, 01:50 PM
#417
Registered Member
iTrader: (13)
Just when I almost got one, The HT tourched my wife's ECU in her sedan, An I was thinking about getting it for my Coupe that i just pick up.. Guess not, Will wait for the $$$ and get Uprev.
03-03-2011, 04:50 PM
#420
Registered User
Join Date: Feb 2011
Location: Portland, OR
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Or can I just connect to computer and update, and reconfigure?