jnguyen

iTrader: (16)

i check in those boxes and hit ok. now what

jnguyen

iTrader: (16)

downloading oneclick version
downloading version.txt from http://www.accessecu.com/support/accessport/oneclick/
version= 1.2.0.0-8720
file= 289737675c0cb934887e610a064ff845 *AccessPORTUpdater_1.2.0.0-8720.exe
file= fd5eee73d5ea5ed88ae51b41706a371c *version.txt
checking beta
downloading version_beta.txt from http://www.accessecu.com/support/accessport/oneclick/
version= 1.2.0.0-9080
file= 63e3e8ef9585ddae6065b82815224cdd *AccessPORTUpdater_1.2.0.0-9080.exe
file= 9439bdccc0058f8a33551a89cba1c25e *version_beta.txt
client-side version= 1.2.0.0-9080
server-side version= 1.2.0.0-9080
no oneclick update necessary
connecting to device
using old comms
request device version failed
failed to request device version
error occurred


help

tristan1334

It should take 5-10 mins. to update. You checked the box for beta right? Clear the codes from your ecu then flash it. Stage 1 or stage 2.

tristan1334

You still have the old firmware for your updater. Download the new firmware then update your AP

jnguyen

iTrader: (16)

this is exactly what happen. I install the updater. Then i plug in my AP and it just randomlly started doing stuff. took about 5 min. Then when it finish i click option and i check both boxes in then hit ok ten it say restart it so i did then when i reconnect it try to update but fails

G37Rider92649

iTrader: (13)

Call Cobb, they'll walk you through it step by step, so much eaiser. Here's a main question also, DOES YOUR CAR STILLS START?? If it does you could do this, if it doesn't...

jnguyen

iTrader: (16)

ok Cobb uninstall but now i have Engine Code p0605 and i let it warm up a little then i drove and it drives but like 1-2 mph and it wont let me go pass that. I read the code but it still say service engine soon. So what do i do. Disconnect battery or reflash or what

jnguyen

iTrader: (16)

i reset the code with engine on on position and it comes back. i did it with the car on and it come back. WTH someone help. i cant drive my car

tristan1334

I cleared mine while engine off but ignition to on position.

jnguyen

iTrader: (16)

i called cobb. they told me to install a map but dont save stock ECU then uninstall it after and it should be fine so right now it installing stock style map then im going to install so hopefully it works. they are thinking my stock map(oem) got corrupted

jnguyen

iTrader: (16)

i did that but it came back so i did while engine on and it came back so i call cobb

tristan1334

I installed stock style map right away after I cleared my ecu. I have not encounter any problem

jnguyen

iTrader: (16)

some reason everything works fine now except this Airbag belt thing keep poping up above the GAS gauge. idk what it is but it keep blinking. should i reset the battery

tristan1334

tire pressure?

peterbanks

iTrader: (4)

That is the indicator for the passenger airbag disable. Do you have something light sitting in the passenger seat, that would trigger the weight sensor?