nitrous ne one???
#16
ok so i was talking to my pops and i told him how slow my car is... hes oldschool, he said to spray 100 shot in it. he said if his datsun 280 could hold a 150 shot my car can easily hold 100. gimme some feedback/advice. and if ne one knows the correct jet sizes for a wet shot lemme know!!!!
I've had some fuel injected vehicles with a wet shot in the recent past. You will need to measure your fuel pressure at WOT to correctly size the fuel jet with the nitrous jet. You can purchase a mechnical fuel pressure guage and connect it to your fuel rail on the nipple to test your fuel pressure. Good luck.
#22
Registered Member
iTrader: (4)
I've had some fuel injected vehicles with a wet shot in the recent past. You will need to measure your fuel pressure at WOT to correctly size the fuel jet with the nitrous jet. You can purchase a mechnical fuel pressure guage and connect it to your fuel rail on the nipple to test your fuel pressure. Good luck.
#23
OP, if you need to calculate the size jet you will need for nitrous and fuel then you can go to this website. http://www.robietherobot.com/nitrousjetcalculator.htm
I have used this site along with many people I know and it is very accurate. The site will tell you the amount of HP each jet configuration will give your vehicle.
Last edited by ObsG1; 06-08-2008 at 12:53 PM.
#25
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
You're right. If the kit is made specifically for the car then the manufacturer has already tested the fuel pressure to size the fuel jets. If you buy a universal kit then you would have to measure your fuel pressure to size the fuel jet.
OP, if you need to calculate the size jet you will need for nitrous and fuel then you can go to this website. http://www.robietherobot.com/nitrousjetcalculator.htm
I have used this site along with many people I know and it is very accurate. The site will tell you the amount of HP each jet configuration will give your vehicle.
OP, if you need to calculate the size jet you will need for nitrous and fuel then you can go to this website. http://www.robietherobot.com/nitrousjetcalculator.htm
I have used this site along with many people I know and it is very accurate. The site will tell you the amount of HP each jet configuration will give your vehicle.
awesome site. i actually typed in the system i have on my mustang and it was accurate.
#26
Yea, I was told about this site when I had a Mustang from the guys on DFWstangs. That is a big mustang forum in the DFW Texas(Dallas Fort Worth) if you don't know where I am talking about. Everyone there always swore by the site and I have never heard of a person having issues of running too lean with a wet shot configured from that site. Good luck and keep us posted and make some videos. And of course you will need to run at the dragstrip to give everyone your time.