SchoonerVanHlmt

Any news on the TechnoSquare ECU Flash?? I've sent several emails, but no response since Dec/2007.

Berk HFCs on the way, as I need a tune for my mods.

Any other recommendations?

Thanks

JaySpeed

iTrader: (1)

Calling all G37's in SoCal!!!!!!!

I just talked to Padashi at Technosquare, and he said that he has done some testing, but he needs a G37 with some mods to loan him your ECU for 1 to 2 weeks to do some more dyno testing and tuning, before he can finalize the mapping. The dyno will be done at the end probably, he said he really only needs the ECU itself. If i was taking a vacation for 2 weeks, he would have mine, but i live in Florida. Lucky Socals!!

He needs you car, just call 310-787-0847 and ask for him. I told him that i would put this out on our forum here, so he is expecting some calls.

later,

TerribleONE453

hmmm im gonna give him a call. he can take my ECU while my car is at kenstyle..

cvt

Tadashi...

TerribleONE453

lol i was like that can not be the right name.. ^

infidsg35

I know it has nothing to do with a G37 but I read that a new Nismo 350z dynoed at 270HP after TS reflashed it it dynoed at 285HP. But wait theres more they then tweeked somethings and got 296HP!! With just a Nismo Y pipe!!!

TS also found that the stock intake is best as the gains werent as good with a aftermarket!

JaySpeed

iTrader: (1)

I believe it is Padashi! I reaffirmed with him twice!

thanks,

infidsg35

Here is a link read at the end that were it gets good

http://www.my350z.com/forum/showthre...=320191&page=9

cvt

i had my car tuned at Technosquare twice...spend the whole day with Tadashi....unless Tadashi has an evil twin I don't know about then it's Tadashi...

vinnys coupe

iTrader: (1)

humm.. this might b my first performance mod

TerribleONE453

gonna give him a call tomorrow and see whats up... would really make my set up come to life..

vinnys coupe

iTrader: (1)

how did tha call go? And this ecu should perform about 15whp on a stock engine.. now would that ecu produce more if you add any intake to it as well? like if the intake dont give you any power, if you get this ecu would it produce more power or would it still stay power less..

im really interested in this, did any1 by the technosquare for the g35 or z? what did it run you any feedback?

UNV-IT46

iTrader: (3)

yes how was the call?

solopresident

they cracked the code for the japanese model not the us model. need a car for 2 weeks minimum to get it done. From a source not on the forums.

MaxToTheG37

iTrader: (3)

Geez if they were only in East Tennessee... lol Id give my car up for 2 weeks in a heartbeat.