nogoodname

iTrader: (3)

even though we pulled it out, Mid-Life changed the cover piece.
it's because the cover did not snap on, so the key hole had to be taken out to make it snap on.

CEELOSG37S

iTrader: (20)

Oooooooohh. I see. So he might as well just changed the whole thing then because the cover wouldnt just snap on huh. I gotcha.

nogoodname

iTrader: (3)

you can change the whole thing???

like remove the key hole totally???

CEELOSG37S

iTrader: (20)

Yea man. I got the whole assembly thing. Those are the pics I posted on the 2nd page.

nogoodname

iTrader: (3)

Mid-Life got the same piece, i don't think you can change the whole piece

only the cover.... that other piece is actually a part of the passenger door handle...lol

Mid-Life Crisis

iTrader: (2)

I don't think it's wise to replace the whole thing. In case your key battery is ever dead you can still get the cover off to access the original key slot. I know you get a low battery warning or you can go buy a new battery, but it just seems smarter to leave it there and cover it up. Looks the same from the outside and is less work.

CEELOSG37S

iTrader: (20)

Yea I just replaced the cover. I was going to replace the whole thing, but I thought twice about that.

flagrant

iTrader: (1)

Where can i buy the key hole delete?

TJHG37S

iTrader: (20)

Got mine from Riverside Infiniti, they have an eBay store with tons of parts, it's like $30 shipped.

I'd say be sure to wrap the screwdriver in a towel or something as my stock piece was a PITA to remove and I ended up scratching my door above the handle because I didn't wrap it up.

Kidcane

iTrader: (7)

^^+1 for Riverside. Thats where I got mine. You can put electrical tape over the screwdriver but really I would just pull the door handle out and put a towel in there then pop it off where its not exposed.

CEELOSG37S

iTrader: (20)

Got mne from concept z performance.

nogoodname

iTrader: (3)

just go to your regular dealership and pick one up..lol

ask for the piece of plastic beside the handle on the passenger side.... done

JMacsG37

iTrader: (2)

I think i have the worst luck with any mods no matter how simple. I ordered the key hole delete cover. I received one...although it is for the G35. Ours our flat on the end, this one is concave. Back to the dealership i go.

Scoe11

Just did this mod on the coupe ('11). Was worried that the paint would get scratch so went about it the traditional way, by pulling out the plastic hole cap on the side of the door and using the 5/32 hex key to have a little more leeway. Would have been a 5 minute deal but the hex key fell into the door. Had to take the door panel off. Took about a half hour to fetch the key but I was actually quite surprised at how easy it was to remove/replace the door panel. My Volvo C30 was a nightmare to remove. For some reason, Infiniti seems to be quite mod friendly as opposed to other brands.

Anyway, the key delete looks great and no scratches!