rumple_rumple

anyone with pics of the installation via the top? please help!

rumple_rumple

Well, I am not a handyman, . For my 2010 G37 sedan, I want to see pics of where I should go. Is it a bulb replacement only or is there a ballast to deal with too. Lastly, should I go HID or VLED? Thanks in advance for any kind of advice, .

Gazan37

Only time you deal with a ballast is the HID. I don't think you'll be able to reach the city or fog lights very well from the top, its a pretty tight fit for both

Weiboy718

iTrader: (10)

i've done it multiple times through the top and after i'm done my hands are all scratched up and bleeding sometimes haha. so, i recommend if you have big hands do not attempt doing this lol.

TL37

iTrader: (1)

First time to post here and thank you so much for the diy. I was able to change the headlight to HID going from bottom without taking the wheel out but I am having big trouble locating the City/Parking light (Yellow circle) in the picture, can anyone pls help locating it?picture would be excellent!

TONY37X

iTrader: (2)

So the city/parking lights for a 2010 G37 Sedan are 7440 bulbs or 194? Need to get some mirror bulbs in there asap!

ahmsg420

194 will fit

Don Meshal

iTrader: (1)

I know its a noob question ..

but which one is the fog light and which one is the parking light ? =S

we usually talk about it in arabic not english so no idea which one is which

hispeed-lowdrag

iTrader: (7)

the fog light is the long tube like bulb (in the middle of the housing closest to the grille) and the parking light is the small filament bulb just below the fog bulb

Sha37

iTrader: (1)

I took out the parking light all together, I just have the HID and the option of turning the fog lights on. it makes the HID look cleaner while on by itself, and I dont live in canada so I dont have to have it. I will try to post pictures.

TONY37X

iTrader: (2)

Unless you have a 2010 sedan, then the fogs are obviously in the lower bumper

Gunna try and change mine now to my new PIAA H8 Xtreme White Bulbs

TONY37X

iTrader: (2)

Went pretty smooth.... To change these fog lamp bulbs you need to remove at least the 2 closest bolts/screws on the plastic shielding of the engine bay (Below Fog Lamps). From there just pull back the plastic flap, squeeze your hand/arm up in there and turn the bulb to remove. I only removed 2 bolts as stated and so my wrists are a bit scratched up... an extra bolt may make this safer, but either way it's a quick 15-20 min swap. Pictures of new bulbs to follow.

ilovejdmtoy

Nice DIY Guide.

Is there anyway we can install the D2S HID bulbs without removing the bumper?

Loi

iTrader: (12)

Yes, go thru the fender well. helps if you remove the wheel.

TONY37X

iTrader: (2)

*** V-LEDS Big Sale This Weekend! http://hosted-p0.vresp.com/695944/f8a7493936/ARCHIVE

Coupon Code BOOM for 20% Off ALL WEEKEND!!

Plus, if you spend $400 use coupon code KABOOM and save 25% !!