Can this or will this end the clay bar?
#1
Can this or will this end the clay bar?
NANOSKIN Autoscrub 6 inch Pad - Better and Faster than Claying
Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.
NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.
A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.
AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.
AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it
Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly.
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.
Important tips:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.
Various photos of how the pad looks and works
3 inch pad kit
6 inch pad on the Griots on an Uber 5 inch backing plate
Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.
NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.
A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.
AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.
AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it
Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly.
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.
Important tips:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.
Various photos of how the pad looks and works
3 inch pad kit
6 inch pad on the Griots on an Uber 5 inch backing plate
#2
Lexus Defector
iTrader: (60)
A few questions:
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
#3
Registered Member
iTrader: (9)
A few questions:
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
I'm a little skeptical, looks too easy.
AUTOSCRUB 4" Pads</strong
#4
A few questions:
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
So do you think this produces better results than traditional clay bar use or is it just faster?
What lube did you use with it?
Does it actually completely remove water spot etching burned into the paint without using any polish?
How does it leave the paint finish (will it always require polishing after use?)
Thanks.
#7
Lexus Defector
iTrader: (60)
Ok, it's faster. I understood that part. I know that it will be more powerful than and efficient than using a clay bar by hand. That makes sense. But in your professional opinion as a detailer, does it leave the paint surface in better condition that using a clay bar, i.e. smoother and more contaminant free? Will it cause more surface marring than using clay? Will polishing be required after using this? What lubricant do you personally use with it? Will it removed etched water spotting?
Trending Topics
#9
yes we have found in our shop that its been able to remove more contaminants off the paint than a clay bar.
yes we have found that it is more efficient than a clay bar in that you will not miss spots.
yes it will mar if there is not enough lubricant as well if you put too much pressure on the da, you should not have any pressure it should glide on the surface.
it will mar just like a clay bar if used improperly.
yes we have found that it is more efficient than a clay bar in that you will not miss spots.
yes it will mar if there is not enough lubricant as well if you put too much pressure on the da, you should not have any pressure it should glide on the surface.
it will mar just like a clay bar if used improperly.
#15