Project Panda
#47
I ordered a set of Tein Mono Sport coilovers a little over a week and received it a couple of days ago. I chose these over Fortune Auto or KW due to the EDFC Active Pro, but Fortune Auto was a very close choice. That will be next on my list. I don't care too much for true style rears. I'll have a review up when I install them next Friday.
#49
Administrator
iTrader: (9)
#50
The reduced weight from the spring bucket is nice but its also an additional part I have to buy and I already have toe bolts that work for me. I have also always felt staying with the spring bucket style may provide the best compromise of comfort and performance from where the weight of the car sits. I don't have any data to back my feelings up. But this thread was one I read many years ago and it helped me come to the decision.
https://my350z.com/forum/brakes-and-...-or-not-2.html
https://my350z.com/forum/brakes-and-...-or-not-2.html
The following users liked this post:
Rochester (02-21-2019)
#51
I pulled all the old stock and springs off to compare with the Tein Coilovers. Everything is on the car now, but I am considering making some protection sleeve. Aftermarket ones are selling for about $50 a pair, and I'm sure I can make something up for way less. I've never used a sewing machine before but I'm about to learn.
I pulled my Top Speed exhaust off and lined up all the pieces for the Motordyne to get an idea how it needs to be orientated. When I get more free time this week, I'll be installing the Motordyne. I also plan to go ahead and install my Z1 subframe collars. If my new differential comes in on time, Friday, then I'll install that along with replacing the subframe differential bushing. Just trying to get as much done while the car is on jack stands and various components are off.
The following 2 users liked this post by projectpanda13:
jpowersjr2 (04-01-2019),
ngolbuff (02-27-2019)
#52
All the goodies that have been sitting since November of last year. Z1 differential cover Z1 subframe collar Bell Raceworks diff brace Central20 3.916 final drive (in 350z housing)
Had some Amsoil 80W90 gear fluid sitting around.
350z 46 teeth tone ring vs G37 48 teeth tone ring
Painted the differential housing with high temperature paint
Completed unit
Z1 cover looking good
The following users liked this post:
jpowersjr2 (04-01-2019)
#54
Registered Member
let me know how you like it. How much did you find the diff for? I want the 4.08's... but if the 3.9 is cheap enough...
#55
I believe since its a 350Z this is the only thing you need to change to make it work on a G37. So he took the ones from his diff and put them in the 350Z to make it fit.
let me know how you like it. How much did you find the diff for? I want the 4.08's... but if the 3.9 is cheap enough...
let me know how you like it. How much did you find the diff for? I want the 4.08's... but if the 3.9 is cheap enough...
#57
Super Moderator
iTrader: (3)
Sorry for being a bit dense on this...just curious cause I've done a few of these but never thought to change the stub axles for that particular reason lol....so if you don't change these the speedometer will it be running fast or slow (my gut says fast)? any idea by how much it'd be off by?
#58
Will post my review as soon as I get the car on the road. I'm dying to drive the car now.
I'm not too sure to be honest. The 350z/G35 has 46 teeth and the 370Z/G37 have 48 teeth.
Sorry for being a bit dense on this...just curious cause I've done a few of these but never thought to change the stub axles for that particular reason lol....so if you don't change these the speedometer will it be running fast or slow (my gut says fast)? any idea by how much it'd be off by?
#59
Administrator
iTrader: (9)
You and me both. And a number of others I suspect, mostly people who bought it over winter.
Hey Panda, on the assumption that pic is what I'm seeing, love that matte silver finish on the Z1 diff cover.
That Made in USA sticker... kind of crude for Bell to throw that on, but stickers can come off and it's all subjective.
Hey Panda, on the assumption that pic is what I'm seeing, love that matte silver finish on the Z1 diff cover.
That Made in USA sticker... kind of crude for Bell to throw that on, but stickers can come off and it's all subjective.
#60
You and me both. And a number of others I suspect, mostly people who bought it over winter.
Hey Panda, on the assumption that pic is what I'm seeing, love that matte silver finish on the Z1 diff cover.
That Made in USA sticker... kind of crude for Bell to throw that on, but stickers can come off and it's all subjective.
Hey Panda, on the assumption that pic is what I'm seeing, love that matte silver finish on the Z1 diff cover.
That Made in USA sticker... kind of crude for Bell to throw that on, but stickers can come off and it's all subjective.