When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Glad you went with hiding the wires, it makes the white in the shock towers pop significantly. If your suspension permits maybe look into the caps for the strut towers.
Unsure what you did with power and ground cables but both main power wires can be finessed into a hidden location. As for grounds, I recycled the main one in the timing cover and bolted it to the lower bolts in the lower timing cover and used another on the A/C bolts.
Lastly if you're up for it and the VTC wiring gets to you, you can de-pin the connectors and snake the wiring behind the timing cover and have them come out the hole of the upper radiator neck/tube.
Can't wait to see this bay. I got rid of the chime horn and got the relays by the driver side out of that box and taped it to the harness out of the way.
Hey,
Thanks for the advice. I love how your tuck job looks and really glad you came to add this information. I will for sure look into most of what you mentioned. I most likely will not do any de-pinning though.
I'm still chasing down my Bank 1 issue. Swapped ignition coils, new spark plugs, replaced header gasket, rtv'd every flange, replace the PCV valve, and still nothing.
I just bought a smoke testing and hoping to use it today when I get home. Going to smoke test the whole intake system and whole exhaust.
I already paid Eugene for my tune but we cna't move forward until i fix this issue.
The fronts fits perfectly. The rears require the bracket off the 370z Nismo. Someone provided me the drawing for one they made. but it seems mine needs some tweaking
The fronts fits perfectly. The rears require the bracket off the 370z Nismo. Someone provided me the drawing for one they made. but it seems mine needs some tweaking
I'd like to know more about the bracket needed to mount these dampers.
replaced one of my faulty 70mm throttle bodies and the car is drivable now, though not 100% good yet. Took the car down to get emissions and the got my tags renewed.
I wish EPS would release the information of which model car the TB came off of or the oem part number. I had to buy the replacement directly through them.
Now that the car is road legal, I can record for logs to send to Eugene and get tuning on the way.
Does the gap fitment of your rear defuser bug you? What if you ran some vinyl there to soften the transition?
the diffuser actually isn’t mounted on there correctly. I decided I’m going to sell it so I didn’t put double sided tape to keep it flush on the bumper.
I didn’t have space in the garage and decided to put it on the car. It’s only Held on by 1 bolt under the plate.
11-28-2022, 02:05 PM
