DuuMaa's Build Thread
#196
Premier Member
iTrader: (5)
Really cool color, DuuMaa... Amazing the amount of color change based on the angle/lighting. How's the finish holding up?
I've also had a Greddy GTR intake manifold and RJM GTR adapter sitting around and waiting for install for around a year now, but not sure if I'm actually going to ever install them or not. Still need to dump a bunch of $$ into my tranny before I can add any more power.
I've also had a Greddy GTR intake manifold and RJM GTR adapter sitting around and waiting for install for around a year now, but not sure if I'm actually going to ever install them or not. Still need to dump a bunch of $$ into my tranny before I can add any more power.
#197
Really cool color, DuuMaa... Amazing the amount of color change based on the angle/lighting. How's the finish holding up?
I've also had a Greddy GTR intake manifold and RJM GTR adapter sitting around and waiting for install for around a year now, but not sure if I'm actually going to ever install them or not. Still need to dump a bunch of $$ into my tranny before I can add any more power.
I've also had a Greddy GTR intake manifold and RJM GTR adapter sitting around and waiting for install for around a year now, but not sure if I'm actually going to ever install them or not. Still need to dump a bunch of $$ into my tranny before I can add any more power.
Power wise, I don't think it's there but for reliability the cast manifold should be a lot stronger than the stock plastic one. I also have a stock GTR manifold laying around that I doubt I'd be using.
The following users liked this post:
2GoRNot2G (10-31-2017)
#198
Premier Member
iTrader: (5)
Are you planning to do any before and after testing with the RJM/GTR manifold combo or is it all part of your future build? FI says that they have been able to get an additional 30 - 40 rwhp out of FI cars with the GTR manifold, but I'm not planning to do anything with mine until I get my tranny done by Level 10 first.
#199
Are you planning to do any before and after testing with the RJM/GTR manifold combo or is it all part of your future build? FI says that they have been able to get an additional 30 - 40 rwhp out of FI cars with the GTR manifold, but I'm not planning to do anything with mine until I get my tranny done by Level 10 first.
#201
Registered Member
Suspension | Wheels/Tires
Within the first month of owning the car, it has gone through some coilovers. First I had a set of K Sports and after not liking the ride of them I switched over to some BC racing coilovers and is what it currently sits on. Also have the SPC front upper control arm and rear camber kit.
Suspension
- BC BR Type Coilovers
- SPC Upper Control Arms
- SPC Rear Camber Kit
Wheel Specs
Gram Lights 57Xtreme
F: 19x10.5 +43 w/5mm spacer
R: 19x10.5 +43
Tires
Nitto Invo
F: 255/40-19
R: 285/35-19
Other Mods
- OEM Infiniti Sport Front Lip
- Stillen Rear Roof Spoiler
- Project Kics Leggdura 2pc Lugnuts
Within the first month of owning the car, it has gone through some coilovers. First I had a set of K Sports and after not liking the ride of them I switched over to some BC racing coilovers and is what it currently sits on. Also have the SPC front upper control arm and rear camber kit.
Suspension
- BC BR Type Coilovers
- SPC Upper Control Arms
- SPC Rear Camber Kit
Wheel Specs
Gram Lights 57Xtreme
F: 19x10.5 +43 w/5mm spacer
R: 19x10.5 +43
Tires
Nitto Invo
F: 255/40-19
R: 285/35-19
Other Mods
- OEM Infiniti Sport Front Lip
- Stillen Rear Roof Spoiler
- Project Kics Leggdura 2pc Lugnuts
#202
i know this is long ago, but I'm highly considering a set of these in your same specs. Also running BC's. Did you have to do any fender mods? If not, did it rub at all? Always admired your ride. I hope these wheels come out looking as good on a risky black on black option!
Bringing this thread back from the dead, stay posted.
#203
Registered Member
i know this is long ago, but I'm highly considering a set of these in your same specs. Also running BC's. Did you have to do any fender mods? If not, did it rub at all? Always admired your ride. I hope these wheels come out looking as good on a risky black on black option!
https://www.dsgperformance.com/gram-...-3-43mm-offset
#205
Agreed^^, check out my GTR DIY, and I can send the cutouts if you're interested
https://www.myg37.com/forums/d-i-y-i...ils-sedan.html
Also that chrome window trim seems to be begging to go black, so here's that too, lol
https://www.myg37.com/forums/d-i-y-i...-g-sedans.html
Oh, and that diffuser is badas$, way to keep this build going to the stratosphere!
https://www.myg37.com/forums/d-i-y-i...ils-sedan.html
Also that chrome window trim seems to be begging to go black, so here's that too, lol
https://www.myg37.com/forums/d-i-y-i...-g-sedans.html
Oh, and that diffuser is badas$, way to keep this build going to the stratosphere!
Thread
Thread Starter
Forum
Replies
Last Post
kevinmward
Engine, Drivetrain & Forced-Induction
10
05-10-2016 05:25 PM