The "4 door Z" build (4DRZ)- 13 G37S 6spd sedan
#1411
In other car news, the cause of my A/C leak is the Mishimoto condenser that came with my Mishimoto radiator. I could get the parts under my Mishimoto warranty or I could go back to an OEM radiator and condenser for free with free shipping and labor due to my vehicle service contract. I opted for free since I am not tracking the car anymore. However, this means I will have 2 spare Mishimoto radiators and one spare OEM radiator. If you need one, let me know.
#1412
Registered Member
2/26/18- I finally have my Sparco seat back in with the lowered seat rails so I can fit with a helmet and I think I have finally resolved my airbag light with a new 2.2 ohm resistor and also by making sure to disconnect the battery before switching seats.
3/10- I finally wrapped the lower half of the bumpers and side sills in carbon to give the car the more aggressive look of a chin spoiler and rear diffuser. It looks awesome in person!
Rear "diffuser"
"Chin spoiler" You can barely see the carbon weave if you blow it up full size.
You can just start to see the carbon weave here. Looks awesome in person!
4/3- I had the 4.083 gears installed. They make a big difference in the lower gears. More info. including pics with all the part numbers on page 46.
4/9- Installed the Mishimoto radiator/condenser and Concept Z silicone radiator hoses.
4/25- Today's project was installing my new carbon wrapped grille with a new emblem and new high air flow mesh to hopefully help with coolant temps on track. (More on page 49)
5/20- I had Outerwears makes some custom water resistant covers for my Z1 air filters and got to install them today. More on page 51.
5/21- I had my chrome window trim carbon wrapped to match the grille, splitter, side sills and other black trim.
5/23- Today I installed my Z1 2pc. slotted front rotors. They shave 8.2 lbs/corner and should help with cooling. More on page 51.
5/26- I had the Z1 rear subframe bushings installed. Good for track, but difficult to notice on the street.
6/10- I reshaped, sanded, and repainted the jack points and pinch welds and installed my second ZSpeed under tray. More on page 52.
8/6- Installed Z1 motor mounts. Nice improvement in shifting precision and throttle response. More on page 57.
9/3- I installed an Alutec strut tower brace. Shiny, but doesn't do much.
11/6- Z1 adjustable front control arms and SPL endlinks are installed and the alignment is in progress. I am curious to see how it drives. More on page 61.
11/25- Bolted up my new hyper black Drag DR-73 rims and Blizzak WS-80 tires. More on page 62.
3/10- I finally wrapped the lower half of the bumpers and side sills in carbon to give the car the more aggressive look of a chin spoiler and rear diffuser. It looks awesome in person!
Rear "diffuser"
"Chin spoiler" You can barely see the carbon weave if you blow it up full size.
You can just start to see the carbon weave here. Looks awesome in person!
4/3- I had the 4.083 gears installed. They make a big difference in the lower gears. More info. including pics with all the part numbers on page 46.
4/9- Installed the Mishimoto radiator/condenser and Concept Z silicone radiator hoses.
4/25- Today's project was installing my new carbon wrapped grille with a new emblem and new high air flow mesh to hopefully help with coolant temps on track. (More on page 49)
5/20- I had Outerwears makes some custom water resistant covers for my Z1 air filters and got to install them today. More on page 51.
5/21- I had my chrome window trim carbon wrapped to match the grille, splitter, side sills and other black trim.
5/23- Today I installed my Z1 2pc. slotted front rotors. They shave 8.2 lbs/corner and should help with cooling. More on page 51.
5/26- I had the Z1 rear subframe bushings installed. Good for track, but difficult to notice on the street.
6/10- I reshaped, sanded, and repainted the jack points and pinch welds and installed my second ZSpeed under tray. More on page 52.
8/6- Installed Z1 motor mounts. Nice improvement in shifting precision and throttle response. More on page 57.
9/3- I installed an Alutec strut tower brace. Shiny, but doesn't do much.
11/6- Z1 adjustable front control arms and SPL endlinks are installed and the alignment is in progress. I am curious to see how it drives. More on page 61.
11/25- Bolted up my new hyper black Drag DR-73 rims and Blizzak WS-80 tires. More on page 62.
#1413
Registered Member
iTrader: (3)
In other car news, the cause of my A/C leak is the Mishimoto condenser that came with my Mishimoto radiator. I could get the parts under my Mishimoto warranty or I could go back to an OEM radiator and condenser for free with free shipping and labor due to my vehicle service contract. I opted for free since I am not tracking the car anymore. However, this means I will have 2 spare Mishimoto radiators and one spare OEM radiator. If you need one, let me know.
#1414
Administrator
iTrader: (9)
#1415
Administrator
iTrader: (9)
Last edited by Rochester; 06-10-2020 at 08:09 AM.
The following users liked this post:
Lego_Maniac (06-10-2020)
#1416
Registered Member
#1417
I decided late last year when I realized I got everything out of this car in terms of lap times that I could and more modern machinery with significantly more power pulls away from me at Road America with the long straights. Satisfyingly, I am still able to catch the majority of those cars in the braking zones and the areas where it gets a bit twisty. I also figured that roughly 5 years worth of track days were probably enough for this car. I am starting to save up for the next sports car that will definitely be in a different league in terms of performance. I really thought I was going to get an ATS-V sedan 6 spd, but they are impossible to find loaded. So now I am patiently waiting to see what some of the new sports cars are like. New versions of the Nissan Z, BMW M3, Audi RS3, Cadillac CT4-V Blackwing, and Subaru STI all top the list of cars I am waiting to be released.
Yes 7 character limit in WI. Which reminds me, I need to decide if I can think of a better plate idea or if I am just going to keep this one.
#1418
Administrator
iTrader: (9)
STKNHND
Seriously.
Seriously.
#1419
Registered Member
iTrader: (3)
Now we all have to scroll through that until the next page. So........
I decided late last year when I realized I got everything out of this car in terms of lap times that I could and more modern machinery with significantly more power pulls away from me at Road America with the long straights. Satisfyingly, I am still able to catch the majority of those cars in the braking zones and the areas where it gets a bit twisty. I also figured that roughly 5 years worth of track days were probably enough for this car. I am starting to save up for the next sports car that will definitely be in a different league in terms of performance. I really thought I was going to get an ATS-V sedan 6 spd, but they are impossible to find loaded. So now I am patiently waiting to see what some of the new sports cars are like. New versions of the Nissan Z, BMW M3, Audi RS3, Cadillac CT4-V Blackwing, and Subaru STI all top the list of cars I am waiting to be released.
The following users liked this post:
4DRZ (06-11-2020)
#1421
What is with your suggestions lately?
It's definitely accurate since it is stating facts. The SV D MNLS plate I have now is trying for a greater cause to Save the Manuals, but I fear that most people do not understand it. Then again, the car people that it is for probably understand it. Maybe I will just keep it. My front runner for a different plate is SV A 6SPD, but that doesn't really do it for me either. Maybe GOT 6SPD? Hmmm...
It's definitely accurate since it is stating facts. The SV D MNLS plate I have now is trying for a greater cause to Save the Manuals, but I fear that most people do not understand it. Then again, the car people that it is for probably understand it. Maybe I will just keep it. My front runner for a different plate is SV A 6SPD, but that doesn't really do it for me either. Maybe GOT 6SPD? Hmmm...
#1423
Administrator
iTrader: (9)
And I was genuinely serious about STKNHND. I think that's an awesome tag name. If some stranger wants to turn that into a slur, whatever, that's their problem for lack of humor. Honestly, all I see is stick-in-hand, because you have a proper manual transmission. I mean, if I had thought of this earlier, it might have been a contender for me a couple years ago.
Granted, this was an actual suggestion right on the heels of poking fun.
Last edited by Rochester; 06-12-2020 at 10:16 AM.
#1424
I had a different idea for a license plate. What about something car related in Japanese since it is a Japanese car?
Agile
Fast
Fun
Impressive/Cool (actual Japanese car slang- the rest are just literal translations)
The problem I am running into is that Japanese words seem to be significantly longer than English words and we only get 7 letters on our plates here in WI.
Agile
Fast
Fun
Impressive/Cool (actual Japanese car slang- the rest are just literal translations)
The problem I am running into is that Japanese words seem to be significantly longer than English words and we only get 7 letters on our plates here in WI.