Rochester's new G
#1036
DIY Cheapskate/Mod
I tried making the eyelid pearl white, looked goofy lol, and since you have nice orange accents, and forced to run the front plate, figured it would fit. Im going to be doing mine almost exactly like that, except gunmetal grey on the projector instead of white. I have to wait till next year, or pay up $400. No point since I can do it myself.
White lid, gunmetal projector:
mirrored:
White lid, gunmetal projector:
mirrored:
Last edited by hexotic; 11-15-2015 at 06:04 PM.
#1037
Administrator
Thread Starter
iTrader: (9)
Chrome projector ring, and maybe black maybe chrome on the turn-signal ring. No LED mods, and either the eyelid painted the same as the housing, or amber.
Not sure about painting the side-marker, or leaving it alone too. Your first shop was the best, IMO.
Thanks for playing.
Not sure about painting the side-marker, or leaving it alone too. Your first shop was the best, IMO.
Thanks for playing.
#1038
DIY Cheapskate/Mod
ive seen someone do main projector chrome, and the eyelid chrome. With the right lighting, looks like an eye.
But based of what you said, here, i slapped on an old PS Light I did a while back as a mockup for my own. Basically what you described.
P.S. Im really bored at home right now, so if you have any ideas you want me to visualize, throw them at me lol.
But based of what you said, here, i slapped on an old PS Light I did a while back as a mockup for my own. Basically what you described.
P.S. Im really bored at home right now, so if you have any ideas you want me to visualize, throw them at me lol.
#1039
Dropping these pics here, for posterity.
It's a few weeks before the snows & duckfeet go back on for Winter, and the car is perched at the end of my driveway. No touch-up on the photos, except for the plates. Exactly as the camera saw the car.
The more I eye hump this car , the more I'm wanting those headlight assemblies painted.
It's a few weeks before the snows & duckfeet go back on for Winter, and the car is perched at the end of my driveway. No touch-up on the photos, except for the plates. Exactly as the camera saw the car.
The more I eye hump this car , the more I'm wanting those headlight assemblies painted.
The following users liked this post:
Rochester (11-15-2015)
#1040
Administrator
Thread Starter
iTrader: (9)
Essentially:
- Gunmetal housing
- Chrome projector ring (unpainted)
- Chrome turn-signal ring (unpainted), *or* gunmetal... haven't decided.
- OEM turn-signal lens (not cleared)
- Amber side marker (unpainted), *or* gunmetal... haven't decided
- Amber eyelid (swinging back to the "like" column, LOL)
#1042
Administrator
Thread Starter
iTrader: (9)
Well, it's going to be a while, so don't get too excited.
That mod is tentatively planned for 2017, which is when I'm also planning on swapping out my R2C intake for the Takeda long-tube setup. I figure to remove the front bumper for both, so they could happen at the same time. However, I might get curious before then, and experiment with dropping the front bumper just for the skills. We'll see. In any event... 2017 is the likely target.
I've got mods all lined up for 2016:
And for 2017:
I try to keep plans around $3000/year, and that's how the next two years are looking so far. But nothing is written in stone, and things can change at any time.
That mod is tentatively planned for 2017, which is when I'm also planning on swapping out my R2C intake for the Takeda long-tube setup. I figure to remove the front bumper for both, so they could happen at the same time. However, I might get curious before then, and experiment with dropping the front bumper just for the skills. We'll see. In any event... 2017 is the likely target.
I've got mods all lined up for 2016:
- 4.083 rear gears
- Rear diff bushings
- LED fogs
- Short throw shifter
- Transmission mount
- Undercarriage shroud
- 4 new snow tires
And for 2017:
- 4 new PSS summer tires (if needed)
- Front Camber arms
- Front CO and Camber arm install
- Takeda Long-tube intake
- Motordyne M370 UIM
- UpRev Tune
- Headlight Assembly customization
I try to keep plans around $3000/year, and that's how the next two years are looking so far. But nothing is written in stone, and things can change at any time.
#1043
DIY Cheapskate/Mod
the shop that was doing my springs had a takeda they ordered for a client that didnt show up, I was so tempted to buy it....... Only thing that stopped me was that they didnt have a rain guard for it lol. They had a 2013 coupe in the shop the owner gave me a ride in while waiting for my install with the takeda long tube.... sounds beautiful.
#1044
Premier Member
iTrader: (1)
the shop that was doing my springs had a takeda they ordered for a client that didnt show up, I was so tempted to buy it....... Only thing that stopped me was that they didnt have a rain guard for it lol. They had a 2013 coupe in the shop the owner gave me a ride in while waiting for my install with the takeda long tube.... sounds beautiful.
#1047
Administrator
Thread Starter
iTrader: (9)
#1048
DIY Cheapskate/Mod
you have no idea what a pain in the *** it is to find them in canada lol. I know now where to get them locally, but planning to do the install myself, it will have to wait for spring or whenever its warm enough for me to take it up to the cottage and climb under. Or ill jump the gun in the next month and rent a shop for a few hours....