Rochester's new G
#1863
Administrator
Thread Starter
iTrader: (9)
As far as I can tell, this new 1.65" aluminum hose clamp from P2M is a perfect fit. Being fully clamped down is right on the money as tight as I could get anyway. Knock on wood for no coolant leakage... assuming that, this is a highly recommended bit of engine bay bling.
#1864
Administrator
Thread Starter
iTrader: (9)
Yep. Before sending them to the curb, old throw rugs get a stint of garage duty for a few years.
Sadly, the garage floor is really bad, 4DRZ. Cement is cracked and heaving, and the carpets help. I can't even guess how old it is... 60 years, probably. I replaced the roof almost 20 years ago, and there were no less than 3 layers of ashpalt over the original layer of cedar. Had to replace all the collar ties just to keep it solid. It's usable now, and functional, but very basic. Honestly, I'm just happy to have a garage at all.
I would LOVE to have a heated 3-car garage, with drainage and a lift... that would be a dream.
Sadly, the garage floor is really bad, 4DRZ. Cement is cracked and heaving, and the carpets help. I can't even guess how old it is... 60 years, probably. I replaced the roof almost 20 years ago, and there were no less than 3 layers of ashpalt over the original layer of cedar. Had to replace all the collar ties just to keep it solid. It's usable now, and functional, but very basic. Honestly, I'm just happy to have a garage at all.
I would LOVE to have a heated 3-car garage, with drainage and a lift... that would be a dream.
Last edited by Rochester; 07-31-2017 at 05:28 PM.
#1865
Registered Member
iTrader: (7)
Yep. Before sending them to the curb, old throw rugs get a stint of garage duty for a few years.
Sadly, the garage floor is really bad, 4DRZ. Cement is cracked and heaving, and the carpets help. I can't even guess how old it is... 60 years, probably. I replaced the roof almost 20 years ago, and there were no less than 3 layers of ashpalt over the original layer of cedar. Had to replace all the collar ties just to keep it solid. It's usable now, and functional, but very basic. Honestly, I'm just happy to have a garage at all.
I would LOVE to have a heated 3-car garage, with drainage and a lift... that would be a dream.
Sadly, the garage floor is really bad, 4DRZ. Cement is cracked and heaving, and the carpets help. I can't even guess how old it is... 60 years, probably. I replaced the roof almost 20 years ago, and there were no less than 3 layers of ashpalt over the original layer of cedar. Had to replace all the collar ties just to keep it solid. It's usable now, and functional, but very basic. Honestly, I'm just happy to have a garage at all.
I would LOVE to have a heated 3-car garage, with drainage and a lift... that would be a dream.
#1866
Premier Member
iTrader: (5)
I've actually got 3 sets of ramps sitting in the corner or my garage that I have never used. People keep giving them to me as gifts, but I'm so used to using a jack and jack stands that I've never actually used the ramps. I guess I just like all the extra room I get when I jack the car up really high... enough room for me, my creeper, and a nice cold beer. Plus, I can't actually remember the last time I only did an oil change on the car without doing something else while I'm under there.
The following users liked this post:
Rochester (08-14-2017)
#1868
Administrator
Thread Starter
iTrader: (9)
Over the last month or two, I've been experiencing a persistent creaking noise in my car. Figuring out mystery noises are always a difficult thing, but doubly so for me, because I'm 100% deaf in one ear, so I can't distinguish direction.
I thought maybe it was because I took my rear seat apart last month, so I took it apart again... noise was still there, just louder, LOL.
I thought maybe it was the new diff bushings that went in a few months ago, but I've ruled that out now that I've got proper race ramps to get under the car, and shoved one of my daughters underneath to identify the location of the noise. It's clearly coming from the passenger rear corner.
It's not a rolling noise, it's suspension, because I can repeat it easily by opening the trunk and rocking the car up and down. P-Brake on or off, doesn't matter. I say that, because the P-Brake is known to create a similar noise when engaged and you rock the car.
Next up, I ordered a cheap stethoscope with an extension, that I plan on using to pin-point which component is groaning. Based on all this, I'm suspicious of the rear shock... which is a component of the Tein Basis Coilover package, and only has 11,000 miles on it.
Makes me very unhappy with the car, on top of which my awesome mechanic of nearly 10 years is starting to get withdrawn and unapproachable, not returning calls or texts or even being at his shop with any regularity. He's really skilled, and fair, but if I can't get him to work on the car anymore, I may have to find a new shop. Damn it.
I also don't know if a single Tein rear shock can be purchased, of if that stuff is only sold as a complete kit. Does anyone know the answer to that?
I thought maybe it was because I took my rear seat apart last month, so I took it apart again... noise was still there, just louder, LOL.
I thought maybe it was the new diff bushings that went in a few months ago, but I've ruled that out now that I've got proper race ramps to get under the car, and shoved one of my daughters underneath to identify the location of the noise. It's clearly coming from the passenger rear corner.
It's not a rolling noise, it's suspension, because I can repeat it easily by opening the trunk and rocking the car up and down. P-Brake on or off, doesn't matter. I say that, because the P-Brake is known to create a similar noise when engaged and you rock the car.
Next up, I ordered a cheap stethoscope with an extension, that I plan on using to pin-point which component is groaning. Based on all this, I'm suspicious of the rear shock... which is a component of the Tein Basis Coilover package, and only has 11,000 miles on it.
Makes me very unhappy with the car, on top of which my awesome mechanic of nearly 10 years is starting to get withdrawn and unapproachable, not returning calls or texts or even being at his shop with any regularity. He's really skilled, and fair, but if I can't get him to work on the car anymore, I may have to find a new shop. Damn it.
I also don't know if a single Tein rear shock can be purchased, of if that stuff is only sold as a complete kit. Does anyone know the answer to that?
Last edited by Rochester; 08-14-2017 at 11:10 AM.
#1870
Administrator
Thread Starter
iTrader: (9)
With a listening tool pressed up to different locations, I'm anticipating something somewhere will be screaming in my ear, but I've never done this before.
#1871
Registered Member
I was thinking more about the beefier sway bar, and your driving style . All things considered, there is definitely more stress on the links. If possible, grab hold of one of them while someone bounces the car. You might be able to feel a vibration with the creaking.
#1873
Premier Member
iTrader: (5)
If you are running Hotchkis sway bars, those bushings have a tendency to start to creak/squeak (and sometimes even clunking) if not lubed every 5K miles or so. I've now had them on my car for 8 - 9 years (was the 2nd test car for them) and have had to lube them once or twice a year every since installing them. Its been an endless cycle and at one point even lubing my front Hotchkis sway bar bushings didn't fix my problem and I actually had to replace the bushings with new ones to get the noises to stop.
#1874
Administrator
Thread Starter
iTrader: (9)
Grease gun is no problem. Thanks, 4doorfury.
If you are running Hotchkis sway bars, those bushings have a tendency to start to creak/squeak (and sometimes even clunking) if not lubed every 5K miles or so. I've now had them on my car for 8 - 9 years (was the 2nd test car for them) and have had to lube them once or twice a year every since installing them. Its been an endless cycle and at one point even lubing my front Hotchkis sway bar bushings didn't fix my problem and I actually had to replace the bushings with new ones to get the noises to stop.
Got my "mechanics" stethoscope in the mail today. Let's see if it helps me pin-point the eek-eek-eek.
The following users liked this post:
2GoRNot2G (08-15-2017)
#1875
Movin On!
iTrader: (13)
I've gone back and forth between OEM, Moog, SPL and SPC over the last few years, and have already settled on Moog should the time come. I used Moog suspension components in my Maxima, and was very content with the decision. Better than OEM, and certainly good enough for this class of car.
Grease gun is no problem. Thanks, 4doorfury.
Eibachs, and they were just re-greased 3 months ago when I had the gears swapped.
Got my "mechanics" stethoscope in the mail today. Let's see if it helps me pin-point the eek-eek-eek.
Grease gun is no problem. Thanks, 4doorfury.
Eibachs, and they were just re-greased 3 months ago when I had the gears swapped.
Got my "mechanics" stethoscope in the mail today. Let's see if it helps me pin-point the eek-eek-eek.