When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
if you dont need stretch go with 255/40 most chain tire shops (firestone, discount tires) wont put a 245 on a 10" wheel
I should be ok with that. I have a buddy that works at a tire shop, I'm sure he'll be able to put them on if I did get that size. But it if it's too much of f a stretch I won't do it.
I should be ok with that. I have a buddy that works at a tire shop, I'm sure he'll be able to put them on if I did get that size. But it if it's too much of f a stretch I won't do it.
I've had 255/35R20 on a 10.5" wheel, so I don't see why 10mm less tire on 12.7mm less wheel is much different (it actually errs on the side of less stretch). These were also put on by Discount Tire.
Sponsored by Rosso Wheels and went square. 20x10 (+25) on Nitto Invo 255/35ZR20. A little more poke in the front than for which I was looking. But, completely in the threshold of tasteful.
Looking to verify my setup before I make a purchase. I'm interested in Stance SC-6ix wheels in 19x9.5 square setup with 245/40/19 offset +35. Im also purchasing KSport coils to complete the setup and get the proper drop. Any and all suggestions would be greatly appreciated.
Looking to verify my setup before I make a purchase. I'm interested in Stance SC-6ix wheels in 19x9.5 square setup with 245/40/19 offset +35. Im also purchasing KSport coils to complete the setup and get the proper drop. Any and all suggestions would be greatly appreciated.