HELP~All squared setups please post here!
#496
Movin On!
iTrader: (13)
For a drop, I'd look into the Tein Basis coilovers to get just the height you want. They only cost about $600. For springs Eibach is probably the most common and will drop about 1.5".
#497
Registered Member
iTrader: (1)
Those of you running just eibachs...will the camber bolts you can buy suffice to correct whatever camber issue the springs will create? Or are the toe arms more necessary? Also, why the hell is that stupid bolt cost so much? Can't I just get a similar bolt from the hardware store? It only looks like a bolt, washers and a nut...why the **** is it like 60 bucks?
#498
Movin On!
iTrader: (13)
Those of you running just eibachs...will the camber bolts you can buy suffice to correct whatever camber issue the springs will create? Or are the toe arms more necessary? Also, why the hell is that stupid bolt cost so much? Can't I just get a similar bolt from the hardware store? It only looks like a bolt, washers and a nut...why the **** is it like 60 bucks?
#499
Registered Member
iTrader: (1)
So the price I saw is for 4 bolts...I guess thats ok. I was hoping to avoid any caber kits whatsoever because IMO they are way over priced. Since I will not be slamming the car and all
#500
Movin On!
iTrader: (13)
Here's the SPC install sheet
https://www.myg37.com/forums/brakes-...-template.html
#501
Going to use this thread to ask a question, which blnewt is probably going to end up answering; Amazon is telling me these wont fit my 2010 G37x but they look identical to the ones i purchased for my last G37x... what do you think?
https://www.amazon.ca/Specialty-Prod...ds=camber+arms
https://www.amazon.ca/Specialty-Prod...ds=camber+arms
#502
Registered Member
Going to use this thread to ask a question, which blnewt is probably going to end up answering; Amazon is telling me these wont fit my 2010 G37x but they look identical to the ones i purchased for my last G37x... what do you think?
https://www.amazon.ca/Specialty-Prod...ds=camber+arms
https://www.amazon.ca/Specialty-Prod...ds=camber+arms
The following users liked this post:
blnewt (04-04-2016)
The following users liked this post:
afrayedknot (02-18-2019)
#505
if you are on 18"s, how wide of a rim can you use before you rub on the steering knuckles. I know offset plays into this, just looking for a somewhat general measurement, or should I say what is the first thing you will rub on the wider you get with an 18" rim
#506
Movin On!
iTrader: (13)
https://www.myg37.com/forums/build-t...d-journey.html