evil-G-nius

iTrader: (1)

I do have the stock BBK that comes on the S coupe. But the coupe showed had the specs I wanna run square and I was told it was too aggressive and it would stick out from the fender. I am pretty sure the car I saw has the BBK as well and when I look at it it looks perfect! I don't want to say they have no clue, they are a vendor here, but I will be checking with other people about it for sure but I was curious if wheel design had something to do with it.

ChinkyChoy

iTrader: (2)

are you lowered at all? if not, then I retract my statement about them not knowing what they are talking about.


If you aren't lowered its going to look stupid

evil-G-nius

iTrader: (1)

I plan to lower. I wanted to get the wheels and everything in one shot. Simple drop on Eibachs

t0nym4c

Anyone know if 19x9.5 15et will fit on a sedan or will it be too aggressive? I've been searching, but I couldnt find anything.

ChinkyChoy

iTrader: (2)

That's going to be an aggressive fit but can be done with stretch and camber.

VQCrew

Hey guys what you think about adding a 1 inch (25mm) spacer to square 19x9.5 +20s with 245 tires on a sedan?? You think just hitting it with some camber good enough? or am I gonna have to pull/roll? would that make the wheels same as 10.5 +20 right? I'm tryin to go even more aggressive for next season.

Gregor12

iTrader: (3)

I think it would be similar to a 19x11.5 +20. I guess with enough camber anything will fit tho lol you're extending the front side of the wheel out 25mm so if you're trying to compare it to another wheel you'd keep the same setup (19x9.5 +20) and add (25x2)mm to the 9.5 width. A 10.5 inch wheel is an inch wider across so it would be like adding .5in to each side from the center. That would be a 19x9.5 with a 12.7mm spacer. Be careful what kind of spacers you use as well. Not something to cheap out on!

I am pretty sure this is how it works but I've been wrong before.

Suubes

All

Would 20x10.5 +30 255/35/20 work as a squared setup on an 08 g37s coupe? Wheels I'm looking at are niche targas. Vendor confirmed they would clear akebonos but was concerned about backspacing. I know there are guys running +25 and +27 (Misaw page 6 and Bassy page 9) but I'm curious if anyone knows if there is the slightest bit of room to play with. I am on eibach pro kit springs

Thanks

blnewt

iTrader: (13)

Check Simpsons, running 275s, so your 255s should
https://www.myg37.com/forums/brakes-...ml#post3891573

Twinturbo6

This seems pretty aggressive but I was wondering if they would fit on a g37x sedan. https://seattle.craigslist.org/est/wto/5350536209.html
20x10.25 et 40

kimmspeed

Aggressively awesome. I like those. Hope they are a fit.

evil-G-nius

iTrader: (1)

I agree. I think I would like em better in silver...be able to see more of the detail of the wheel. But they are definitely different...go for it

Twinturbo6

Thanks for the replies. I like the encouragement but I really need some advice as to if they would fit or not. I would like to run ksports, have maybe a finger gap and have them sit flush with out rubbing issues.

evil-G-nius

iTrader: (1)

Try e-mailing XXR with the wheel spec and tell them your car. They should be able to tell you...thats what they are there for! LoL. Good luck...keep us posted

Twinturbo6

Also a recommendation on tire size would be great. This is not my forte. My 335xi cam staggered so when I bought volks I stayed staggered. But my tires are gonna last maybe 15000 miles and cost 1500$ so this time I want to stay square on my wife's car.