Ark GT F springs installed.
#1
Registered Member
Thread Starter
Ark GT F springs installed.
Got the springs on today and I'm impressed so far with the fit and finish as well as the ride quality. In anticipation of running a 285/35 rear on the OEM wheel I installed a 10mm spacer ahead of the tire. Looking at it I believe there's a date with a camber kit in my immediate future. I get to drive my car maybe 2 or 3 times a week so I have time to get that while the springs settle. There's no fender gap variance between the front and the rear I really should've went ahead and bought and installed the front 15mm spacer after seeing how good the rear looks almost flush. The ride is very similar to factory and I can't wait to see the car settled on the springs since it looks so good right now. Great results for 245.00 on ebay. IMHO Here's a couple pics:
#2
Movin On!
iTrader: (13)
Got the springs on today and I'm impressed so far with the fit and finish as well as the ride quality. In anticipation of running a 285/35 rear on the OEM wheel I installed a 10mm spacer ahead of the tire. Looking at it I believe there's a date with a camber kit in my immediate future. I get to drive my car maybe 2 or 3 times a week so I have time to get that while the springs settle. There's no fender gap variance between the front and the rear I really should've went ahead and bought and installed the front 15mm spacer after seeing how good the rear looks almost flush. The ride is very similar to factory and I can't wait to see the car settled on the springs since it looks so good right now. Great results for 245.00 on ebay. IMHO Here's a couple pics:
#3
Registered Member
Thread Starter
Thanks. Thats a bad phone shot but the wheels are gunmetal powdercoat. I just bought this car used with 19k miles on it and my assumption based on appearances was that the wheels were OEM. Watched your youtube vids and cant wait to post up my own of the Beluga Catback when I get it together with the Takeda.
#4
Movin On!
iTrader: (13)
Thanks. Thats a bad phone shot but the wheels are gunmetal powdercoat. I just bought this car used with 19k miles on it and my assumption based on appearances was that the wheels were OEM. Watched your youtube vids and cant wait to post up my own of the Beluga Catback when I get it together with the Takeda.
Trending Topics
#9
Registered Member
Thread Starter
Thanks guys. I was working the Titan Motorsports car show today so i just got these responses. I will measure the fenders and snap some pics tomorrow. Installed Takeda intake yesterday and it was awesome. (Sarcasm.)
#10
Registered Member
Thread Starter
More pics in the sun. Also got the measurements. Both wheel arches are matched at 26 7/8" . First two pics show front and rear spacing. Rear has 10mm spacer front needs something maybe 15??
#13
Movin On!
iTrader: (13)
That's a real nice drop, very even and should be manageable for a daily driver. Much better than my old B&G springs I had, they were slammed like H&Rs, about 25.75" at the front and 26" in back, it was pretty terrifying in unknown parking garages w/ those dreaded speed humps (those ones that will leave your whole car high centered).
Great shots of those wheels too, really like the finish on those.
Great shots of those wheels too, really like the finish on those.