Vibration & Judder during braking after G37 sat for vacation
#1
Vibration & Judder during braking after G37 sat for vacation
Has anyone else experienced vibration in their steering wheel after the car sat for a 8 days? Before I went away I had the rotors surfaced and they were working perfectly fine. I go away and come back and drive the car this morning and the steering wheel and car are getting crazy vibration/judder. I only drove it for about 10 miles today with not much braking to hopefully clear the rust out.... Also, there was a crazy amount of rain and storms while I was gone so I didn't know if that would make it worse. I never had any problems with my BMW like this, so I was just curious to see if this is normal. Any help would be great... Thanks!
#3
Has anyone else experienced vibration in their steering wheel after the car sat for a 8 days? Before I went away I had the rotors surfaced and they were working perfectly fine. I go away and come back and drive the car this morning and the steering wheel and car are getting crazy vibration/judder. I only drove it for about 10 miles today with not much braking to hopefully clear the rust out.... Also, there was a crazy amount of rain and storms while I was gone so I didn't know if that would make it worse. I never had any problems with my BMW like this, so I was just curious to see if this is normal. Any help would be great... Thanks!
#5
BED in your brakes.
60mph down to 20mph x3
80mph down to 40mph x3
Apply full braking never come to a complete stop. If this fails.....
Try brake clean should be less than $4 per aerosol can at any auto parts....
If this fails remember re-surfacing your rotors will never get rid of the warp. Rather they will remain to re-appear. BEST way is to get slotted or dimpled rotors next time. If in your area rains a lot.
60mph down to 20mph x3
80mph down to 40mph x3
Apply full braking never come to a complete stop. If this fails.....
Try brake clean should be less than $4 per aerosol can at any auto parts....
If this fails remember re-surfacing your rotors will never get rid of the warp. Rather they will remain to re-appear. BEST way is to get slotted or dimpled rotors next time. If in your area rains a lot.
Thread
Thread Starter
Forum
Replies
Last Post
b2autodesigns
Brakes/Suspension
128
03-24-2018 08:44 PM
warpeacelove
Private Classifieds
7
10-28-2015 03:59 AM
370gt253
Engine, Drivetrain & Forced-Induction
2
08-11-2015 01:44 AM
Ihtbealexxx
Brakes, Suspension, Wheels & Tires
1
08-09-2015 04:30 AM