19" Volk GT-S vs 20" Work T1S
#31
I agree with FantastikG37...
I added 10mm Project Kics spacers to my Volks so I'm at 9.5 +25 now upfront running 255.35 Falken FK452 tires... No rubbing at all up front and I'm dropped flush coils.
My rear Volks I added 5mm spacers so I'm at 10.5 +32 now in the rear with 285.30 Falken FK452 tires... Some very slight rubbing in the rear on hard bumps & turns & some steep driveways.
The rears are pretty poked out now, but should be fine if you run a 275 on my offsets. If no just go 9.5 +30 or +25 up front and you'll be fine and keep the back at 10.5 +37 if you do not want to deal with any rubbing at all. Hope this helps.
I added 10mm Project Kics spacers to my Volks so I'm at 9.5 +25 now upfront running 255.35 Falken FK452 tires... No rubbing at all up front and I'm dropped flush coils.
My rear Volks I added 5mm spacers so I'm at 10.5 +32 now in the rear with 285.30 Falken FK452 tires... Some very slight rubbing in the rear on hard bumps & turns & some steep driveways.
The rears are pretty poked out now, but should be fine if you run a 275 on my offsets. If no just go 9.5 +30 or +25 up front and you'll be fine and keep the back at 10.5 +37 if you do not want to deal with any rubbing at all. Hope this helps.
i think i'm almost set on +30 +37
just waiting for someone ***cough*** ***1cleang***
lol
#32
NextLevel Performance
iTrader: (53)
yeah, hit the head on the nail w/ the +37 comments. on a 20x10.5 inch wheel and an A disk...its very safe, flush without having to run a lot of - camber.
The front is questionable. I remember my GT30's and I was SLAMMED. Depends on how low you want to go, how much - camber you want, and the size tires you run.
**LESS THEN A MONTH AWAY!!!!!!!!**
The front is questionable. I remember my GT30's and I was SLAMMED. Depends on how low you want to go, how much - camber you want, and the size tires you run.
**LESS THEN A MONTH AWAY!!!!!!!!**
#33
yeah, hit the head on the nail w/ the +37 comments. on a 20x10.5 inch wheel and an A disk...its very safe, flush without having to run a lot of - camber.
The front is questionable. I remember my GT30's and I was SLAMMED. Depends on how low you want to go, how much - camber you want, and the size tires you run.
**LESS THEN A MONTH AWAY!!!!!!!!**
The front is questionable. I remember my GT30's and I was SLAMMED. Depends on how low you want to go, how much - camber you want, and the size tires you run.
**LESS THEN A MONTH AWAY!!!!!!!!**
i'm not slammed
but low enough
#40
NextLevel Performance
iTrader: (53)
^^^I second this!!
And i actually think you will be just fine w/ the +30 and +37 setup. I even have Mark sending me a 5mm spacer just so I can push the +35 offsets I ordered out if I want(but always have the option to bring them back in).
I say get your order in man...its about a 3 month wait. Sooner the better!
#41
^^^I second this!!
And i actually think you will be just fine w/ the +30 and +37 setup. I even have Mark sending me a 5mm spacer just so I can push the +35 offsets I ordered out if I want(but always have the option to bring them back in).
I say get your order in man...its about a 3 month wait. Sooner the better!
And i actually think you will be just fine w/ the +30 and +37 setup. I even have Mark sending me a 5mm spacer just so I can push the +35 offsets I ordered out if I want(but always have the option to bring them back in).
I say get your order in man...its about a 3 month wait. Sooner the better!
L, my lip looks pretty good molded on.
i'm taking my buddy's car into my friend's shop to do the exact same thing...
i can wait for you
#44
Registered User
iTrader: (29)
Just spacer your GT30's a little. I pushed mine out 10mm in the front and 5mm in the rear. Looks so much better now, and I'm not rubbing except on really really hard bumps or steep driveways only in the rear (my bumper bracket is only slightly hammered). Youre lower than me, so I would just leave the rears or go 3mm but the 10mm should be ok in the front.
#45
still waiting. should i msg Mark and tell him to fly to japan to pick up and drop off???
I'm still thinking +30 +37 but i'll wait for my buddy to slap on his +35 +37
i don't want to touch my bumper bracket. but rubbing is not allowed. hence the wait. i won't be too low so i should be ok.
Just spacer your GT30's a little. I pushed mine out 10mm in the front and 5mm in the rear. Looks so much better now, and I'm not rubbing except on really really hard bumps or steep driveways only in the rear (my bumper bracket is only slightly hammered). Youre lower than me, so I would just leave the rears or go 3mm but the 10mm should be ok in the front.