When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Definitely needs a drop. Lots of people with 20s around that don't rub.
Originally Posted by turbohounds
Not sure if I'm posting this right, and yes the picture is s&%t, but they're 20's on stock suspension. And they rub over big bumps, so I won't be lowering it anytime soon.
If you are rubbing, it is not because they are 20". If you post up your sizes and offsets, you will probably get some specific comments.
The rears are 20x10.5, 33mm offset, tires are Yokohama S-drives 285-30. The offset I was sold is too aggressive, there's plenty room to move the wheel in and make them not rub.
Fronts are 20x8.5, 33mm offset, with 245-35s. They don't seem to rub...
The rears are 20x10.5, 33mm offset, tires are Yokohama S-drives 285-30. The offset I was sold is too aggressive, there's plenty room to move the wheel in and make them not rub.
Fronts are 20x8.5, 33mm offset, with 245-35s. They don't seem to rub...
Those offsets will work but you need to bring it down about an inch and that will bring the camber in and stiffin the ride just enough to keep it from rubbing. Plus it will look much better. That front wheel gap is terrible.