TEIN H-tech G35's Install on the G37C-PERFECT DROP
#92
Registered User
iTrader: (3)
ok, so i think i'm still confused. are you guys using the G35 H-Techs or the 350Z H-Techs?
i was at a G35 meet yesterday and everyone there said to use the 350Z H-Techs as they have a higher spring rate than that of the G35's H-Techs.
i know the G35 and G37 are two different cars, but i guess i just need clarification.
Thanks!
i was at a G35 meet yesterday and everyone there said to use the 350Z H-Techs as they have a higher spring rate than that of the G35's H-Techs.
i know the G35 and G37 are two different cars, but i guess i just need clarification.
Thanks!
#93
Sam Rothstein
iTrader: (9)
Join Date: Feb 2008
Location: Riverside/San Diego, CA
Posts: 10,435
Likes: 0
Received 8 Likes
on
8 Posts
ok, so i think i'm still confused. are you guys using the G35 H-Techs or the 350Z H-Techs?
i was at a G35 meet yesterday and everyone there said to use the 350Z H-Techs as they have a higher spring rate than that of the G35's H-Techs.
i know the G35 and G37 are two different cars, but i guess i just need clarification.
Thanks!
i was at a G35 meet yesterday and everyone there said to use the 350Z H-Techs as they have a higher spring rate than that of the G35's H-Techs.
i know the G35 and G37 are two different cars, but i guess i just need clarification.
Thanks!
#96
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Marietta, GA
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
The feedback we have gotten on the G35 H-Tech's has been very solid. I can try a set of the 350Z H-Tech's and see how those work too.
#97
I havent tested the 350Z H-Tech or S-Tech, so I can't comment on it. In theory, that higher spring rate should result in less of a drop, but you never know until someone tries it.
The feedback we have gotten on the G35 H-Tech's has been very solid. I can try a set of the 350Z H-Tech's and see how those work too.
The feedback we have gotten on the G35 H-Tech's has been very solid. I can try a set of the 350Z H-Tech's and see how those work too.
#98
Just ordered a set of H-techs through Sharif and forged...Seems I may have got the "old pricing" woooooot ...Thanks Sharif for the help...The H-Techs are the exact drop I'm looking for...No rubbing, and no slammed looked...Just aggressive...
#99
Hey Sharif - I probably should have asked this before I ordered (o well) ...But is there any truth after the H-Techs settle the rear will be lower then the front? I would hope thats not the case, but I dont know much about the results others have had thus far...
#103
Registered User
Join Date: Feb 2008
Location: Sterling Heights, MI
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Guys i'm thinking about ordering the H-Techs first thing monday morning, is it true the handling will be worse than the stock springs that came with the car? and someone confirm that it is a 1inch drop?
#105
Registered User