Big problems with H&R springs and 20s
#49
Registered User
Join Date: Feb 2008
Location: Baltimore, MD
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem, except my wheels haven't came in yet.. I was running the stock 19's and it was tuckin tire all the way around.. i was talkin to dean at tire rack, he said that they thought it was 1.2 and 1 also.. i went and tryed to get an alignment and played hell trying to find someone to do it.. after finding a place i found out the the camber in the front was -2.6 and -2.3 in the rear.. way out of spec without any adjustments.. still wait to find a fix for the front.. i went ahead and took the h&r's off and returned them for the eibach, which should be releases in about a week according to eibach.. the front spring is done bein engineered, the rear is almost complete...
hope this helps..
hope this helps..
#52
Registered User
Join Date: Feb 2008
Location: Baltimore, MD
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Nah I don't have a camber or toe kit.. The way i looked at it, why should i spend an extra 500 for the the stillen rear camber and toe kit when the car is still gonna ride like it has not springs in it.. I spoke with the guys at tire rack and he had recommended getting the kit with the eibachs, but he said i might be able to use the factory adjustments in the rear first.. As soon as i get them in ill fill ya guys in with some details and pics..
#55
Registered User
Join Date: Sep 2005
Location: Augusta, GA
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
i rubbed once in the front
decided to try it out so i went over a few speed bumps.. rubbed coming down on the last one. i must of had my wheels turned though
decided to try it out so i went over a few speed bumps.. rubbed coming down on the last one. i must of had my wheels turned though
#56
Registered User
Join Date: Sep 2005
Location: Augusta, GA
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
in the rear.. i just cut the extra metal that didn't need to be there. anything in front of the plastic area where it bolts together i cut off
#59
Keeping springs and going down in front tire size to 245 35 20 in BFG.
This should work out ok from my calculations.
I will have 1/2 inch inside walls less and about 5/8 less on each side hopfully equals no rubbing.
The look is so badass.
This should work out ok from my calculations.
I will have 1/2 inch inside walls less and about 5/8 less on each side hopfully equals no rubbing.
The look is so badass.