those familiar with or have front stoptech brake pads

Thread Tools
 
Search this Thread
 
Old 09-22-2016 | 11:59 PM
  #1  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
those familiar with or have front stoptech brake pads

i bought some pads from amazon new and noticed only one pair had the wear indicator. the other pair doesnt. this is normal? is this some new thing? attached is a pic of wat i received. thanks

Last edited by saywat?; 03-25-2019 at 02:37 PM.
Old 09-23-2016 | 12:30 AM
  #2  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,877
Likes: 4,944
It's getting more common for only 1 wear indicator for the front and 1 for the back, depending on brand. Both sides should wear just about the same, so unless you've had a sticking piston only having one "squealer" should suffice
The following users liked this post:
saywat? (09-23-2016)
Old 09-23-2016 | 12:42 AM
  #3  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
If thats true that sucks. Imagine having one stuck caliper and never knowing until the pad is worn completely to the metal lol. Now we gotta check who has 1 and who has 2 indicators.
Old 09-23-2016 | 12:49 AM
  #4  
JSolo's Avatar
JSolo
Just say no!!!!!
iTrader: (14)
 
Joined: Oct 2011
Posts: 6,103
Likes: 590
From: People's Republic of IL
Don't you inspect pad wear anytime the wheels are off? I usually stick my head in there twice a year, when swapping to/from snow wheels/tires.
Old 09-23-2016 | 12:59 AM
  #5  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
I usually do. But this car its harder to see the pads. my g35 I could see easily.
Old 09-23-2016 | 12:02 PM
  #6  
JSolo's Avatar
JSolo
Just say no!!!!!
iTrader: (14)
 
Joined: Oct 2011
Posts: 6,103
Likes: 590
From: People's Republic of IL
The fronts are real easy once you pivot the assembly out. Rears take a bit more contorting to see. I assume we're talking about the S rotors?
Old 09-23-2016 | 01:16 PM
  #7  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,877
Likes: 4,944
I've also gotten in the habit of jacking the front end up w/ my oil changes and free spinning the front wheels, just to make sure there's no binding. Then placing the vehicle on my ramps.
Old 09-23-2016 | 01:43 PM
  #8  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
Yea sport brakes
Old 09-23-2016 | 03:09 PM
  #9  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
i contacted stoptech this morning. the guy said it was normal. when i asked why he said at some point thats how the oem ones were designed and they jus copied it. idk i looked at photos of oem pads and they had one on each pair so idk. its not a big deal.
Old 09-23-2016 | 03:40 PM
  #10  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,877
Likes: 4,944
Guess you're forced to check your pads now instead of waiting for them to scream at you
Old 09-23-2016 | 04:34 PM
  #11  
Kris9884's Avatar
Kris9884
Registered User
iTrader: (3)
 
Joined: Feb 2016
Posts: 2,074
Likes: 202
From: MO
Mine started squeaking this week after my very spirited weekend run. I've been waiting for an excuse to grab some Hawk 5.0's, I'll check with the new pads and see what they come with.
Old 09-23-2016 | 06:21 PM
  #12  
micafd3s's Avatar
micafd3s
Registered User
iTrader: (2)
 
Joined: Jun 2015
Posts: 1,201
Likes: 114
From: NYC|PA
the new wear indicator for the side that doesn't have it is your rotor...


Old 09-24-2016 | 11:27 PM
  #13  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
I guess stoptech was right. Just did front brakes today and OEM only has one indicator on pass side.
Old 09-25-2016 | 12:24 AM
  #14  
saywat?'s Avatar
saywat?
Thread Starter
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,233
Likes: 277
Also stoptech replacements were great came with new pins, cotter pins, bracket thing, and shims already attached to pads. Fyi
Old 09-25-2016 | 07:26 AM
  #15  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,877
Likes: 4,944
Originally Posted by saywat?
I guess stoptech was right. Just did front brakes today and OEM only has one indicator on pass side.
That just means your drivers side caliper will start to stick.


Quick Reply: those familiar with or have front stoptech brake pads



All times are GMT -4. The time now is 12:24 PM.