hobbs

for a 2011 G37? I searched and last post was about (3) months ago. Anything on the market since then that does not contact engine cover or hood insulation?

GraphiteG37S

iTrader: (29)

Circuit Sport... Not sure if it touches the hood liner..

GTspec will also fit but will rub on the hood liner.

Dejan

iTrader: (1)

DIY for GT Spec mentions putting 2 old credit cards on the edges of engine cover to stop the bar from rubbing. Guess any tough plastic of similar thickness would do, and you could cut them exactly to size so that it is not easily visible.

soundmike

iTrader: (6)

I have the CS/Alutec one, there is ***very*** minor rubbing, you have to really look for it. Granted, i have a sedan, which may be different.

Circuit Sport (Alutec) Strut Bar - G35Driver

rks

iTrader: (6)

I have the GT Spec and it rubs slightly. IMHO I don't think it's a big deal at all.

hobbs

Rubs engine cover, hood insulation or both?