I'm looking for SPC front camber for G37s .. Can you guys please check the picture and tell me what's in the red circle? is it required to install front camber?

Another question is why a lot of people just get the Rear Camber kit and skip on the front camber kit? The front ones are not really necessary?

Thanks

 

I think those items are used for caster adjustment but I might be lying. When I lowered my G I installed front and rear control arms and the rear toe bolt. Took me about 6 hours with a couple breaks.

 

it depends what your dropped on. i can get away with nothing, but im going to get the rear camber arms. dont need the toe bolts or front arms.

get an alignment and then go from there to see whats necessary

 

Don't these things come w/ instructions?

 

Those are not even the g37 camber Arms. That picture might just be a sample picture.

 

The circled parts are not a part of the G37 camber kit, it's a stock photo.

 

Why don't you find a place that deals w/ our cars and the right part number? That way you don't get these bogus parts

 

and the front cambers are not necessary unless you're going real slammed.

 

I still needed the front UCAs even with Eibach springs.

 

I just got my alignment with my car that has Tein coilovers and the best I could get in the front was -1.75 degrees. That is at the outer limit within spec. I am getting front camber arms so I can save some tire life. Maybe go with -.75 or -1.0 degrees in the front and about the same in back. My alignment guy said the back had plenty of room to adjust but not the front.