Help Car is slammed, and tires are eaten, what do I need to fix this.
#16
Registered User
iTrader: (5)
If you have an aggressive drop with aggressive wheels/offsets a camber kit is not going to be able to get you back within OEM spec.
I for example have a camber kit but am running ~ -3 camber all around and after about 8k my tire wear is fine. Just some inner wear due to camber but the wear is even.
Just make sure when you get an alignment that your TOE IS @ ZERO and you should be good to go.
#18
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: jacksonville, fl
Posts: 4,563
Likes: 0
Received 0 Likes
on
0 Posts
post your alignment specs but like tomie said - toe = 0 is the most important part. you can run negative camber without killing your tires. alignment "in spec" allows a certain range for toe which will still eat your tires. before you spend all the $, its important just to check the basics.
#19
Florida G35 Club, Premier Member
iTrader: (3)
Join Date: Oct 2005
Location: Orlando, FL
Posts: 2,508
Likes: 0
Received 0 Likes
on
0 Posts
Basically with an aggressive drop the factory adjustment settings won't reach factory specs anymore. you need a SPC front and SPC rear camber kits to extend the adjustment range. Even then, you still might not be IN spec, but possibly closer.
Thread
Thread Starter
Forum
Replies
Last Post
SkylineG
Intake and Exhaust
13
10-03-2018 07:56 PM
drewfinity
Newbie Corner
15
08-20-2015 08:17 PM
MeatySock
Brakes & Suspension
9
08-14-2015 08:25 AM