Speed Bump Help
#17
Registered User
iTrader: (7)
Join Date: May 2008
Location: Seattle, WA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
KW >>>> Eibach
In terms of handling, KW hands down but if you're not planning to track your car, I don't see how you will use KW to its full potential for daily driving.
Eibach + Hotchkis should get you the handling you want for daily driving and not have to worry about speed bumps but it doesn't mean you can take a speed bump on at high speed
In terms of handling, KW hands down but if you're not planning to track your car, I don't see how you will use KW to its full potential for daily driving.
Eibach + Hotchkis should get you the handling you want for daily driving and not have to worry about speed bumps but it doesn't mean you can take a speed bump on at high speed
Last edited by Raizon; 03-11-2010 at 05:20 PM.
#18
Registered User
iTrader: (2)
coilovers are going to always be better than spring but you have to consider 2 things:
1. how much do you want to spend
2. are you tracking.
coilovers are only worth it if you are tracking your car, springs will do just fine for spirited driving. eibach springs are $230, coilovers are $1,000+ that was my deciding factor
1. how much do you want to spend
2. are you tracking.
coilovers are only worth it if you are tracking your car, springs will do just fine for spirited driving. eibach springs are $230, coilovers are $1,000+ that was my deciding factor
#19
Registered User
iTrader: (9)
where do you live that all you drive over is speedbumps? and i don't track my car but i started with eibachs. then got tanabe's for the rear and kept eibach fronts to level out the drop. but still not happy with height i got the tanabe sustec coils. its great being able to adjust the height to your exact preference. lou@amplified gave me a great deal on the coils
Last edited by ruckus12251985; 03-11-2010 at 08:31 PM. Reason: added info
Thread
Thread Starter
Forum
Replies
Last Post
misc
Engine, Drivetrain & Forced-Induction
29
05-24-2023 03:57 PM
sunshineskyler
Engine, Drivetrain & Forced-Induction
4
11-13-2015 09:47 AM