jwkde

Is there any trick to replacing the front turn signal bulb - standard bulb?


I was able to pop the burnt out bulb out but the new one will not seat all the way. I am pushing it really hard but it will not stay in. The base looks the same but it will not snap or grab. I don't want to take it to Infiniti


Thanks

2five8

I just kept flipping the bulb until it snapped in. If it's not fitting maybe there is some debris trapped in there or one of the connections maybe bent or broken. I would try the original bulb to see if it still fits and if it does then maybe the bulb you bought is defective? Good luck, hope it works out!

Epiphany

Definitely the right bulb you got? When I replaced mine it snapped right into place on both sides without issue.

jwkde

Problem solved.


All the information out there shows bulb 7440NA as the bulb for the 2010 G37. Apparently the 2011 uses 7444NA. My car was built at the end of 2010 production cycle and the 7444NA is the correct bulb.


Strange but true!


Thanks for the help