rear turn signal conversion to LED rings
#153
Premier Member
iTrader: (1)
I've sent you an email , my email is also bhathal_amritpal@hotmail.com I just wanna know how mch the kit is!
The following users liked this post:
buGfresh (06-29-2014)
#156
Premier Member
iTrader: (1)
I got my kit today and am going to install it this evening. Can't wait! I do have a problem though. My kit did not come with any installation instructions that others have mentioned. I know how to wire it up, but not sure how to find out which wires are the correct wires to use. Any idea how to figure that out?
'08 G37S coupe
'08 G37S coupe
#157
Registered Member
iTrader: (1)
I got my kit today and am going to install it this evening. Can't wait! I do have a problem though. My kit did not come with any installation instructions that others have mentioned. I know how to wire it up, but not sure how to find out which wires are the correct wires to use. Any idea how to figure that out?
'08 G37S coupe
'08 G37S coupe
#158
Premier Member
iTrader: (1)
Yeah, and actually I don't know which wires on the kit box to splice into the brake wire and turn signal wire, so even if I knew how to find those wires in the trunk, I still don't know which wires to splice into them from the kit. I'm so ready to get this installed and cannot do anything because no instructions came with the kit.
Does anyone have the install instructions that can be posted? I'm not talking about a DIY, I simply need to know which wires on the box go to the signal and brake wires in the car. And of course if anyone can tell me how to locate the signal and brake wire in the harness, that would be great too.
Does anyone have the install instructions that can be posted? I'm not talking about a DIY, I simply need to know which wires on the box go to the signal and brake wires in the car. And of course if anyone can tell me how to locate the signal and brake wire in the harness, that would be great too.
#159
Yeah, and actually I don't know which wires on the kit box to splice into the brake wire and turn signal wire, so even if I knew how to find those wires in the trunk, I still don't know which wires to splice into them from the kit. I'm so ready to get this installed and cannot do anything because no instructions came with the kit.
Does anyone have the install instructions that can be posted? I'm not talking about a DIY, I simply need to know which wires on the box go to the signal and brake wires in the car. And of course if anyone can tell me how to locate the signal and brake wire in the harness, that would be great too.
The following users liked this post:
Jestered (07-02-2014)
#162
Premier Member
iTrader: (1)
I got it installed and love it! I don't know why Infiniti didn't do this from the factory.
Some advice for anyone installing this. Make sure you have a meter to check the wires so you know exactly which ones you're wanting to get at. I couldn't find my meter and it took me so much longer to figure out how to install the kit. I decided to use the wires that someone else posted on page 6 of this thread. They posted the wires for an '08 G37S and that's what I have so I figured they would be the same and they weren't! Also on page 6 of this thread someone else posted how they wired it up on their '09 G37 and it turns out that is exactly how mine wired up. So, the wiring in our cars may not be the same, even with the same year and model car. Unless of course I have an '09 and thought it was an '08 for the past month . It's best to have a meter to quickly determine which wires are which and the install is a breeze.
Also, I'd like to thank "buGfresh"! When I ran into trouble with the wiring, I reached out to him via email. He responded quickly and really helped me think through the problem and find the right wires. He could have always just said, "Hey, you need a meter", but he didn't. He was a great help and I really appreciate it!
The kit rocks! I love my new rear turn signals!
Some advice for anyone installing this. Make sure you have a meter to check the wires so you know exactly which ones you're wanting to get at. I couldn't find my meter and it took me so much longer to figure out how to install the kit. I decided to use the wires that someone else posted on page 6 of this thread. They posted the wires for an '08 G37S and that's what I have so I figured they would be the same and they weren't! Also on page 6 of this thread someone else posted how they wired it up on their '09 G37 and it turns out that is exactly how mine wired up. So, the wiring in our cars may not be the same, even with the same year and model car. Unless of course I have an '09 and thought it was an '08 for the past month . It's best to have a meter to quickly determine which wires are which and the install is a breeze.
Also, I'd like to thank "buGfresh"! When I ran into trouble with the wiring, I reached out to him via email. He responded quickly and really helped me think through the problem and find the right wires. He could have always just said, "Hey, you need a meter", but he didn't. He was a great help and I really appreciate it!
The kit rocks! I love my new rear turn signals!
Last edited by Jestered; 07-03-2014 at 01:26 AM.
The following users liked this post:
buGfresh (07-03-2014)