2010+ G sedan - "CMOD" mesh grille photos?
08-27-2014, 09:17 PM
#16
Got the mesh a little while ago, finally opened the package, this stuff is NICE, highly recommend for any custom grille/vent projects. The material, finish, etc are all nearly identical to OEM stuff. Hefty construction but easy to cut & shape
Most importantly, this stuff is much more visible, particularly at an angle due to its depth, which IMO makes the biggest difference as the front grille will likely never be viewed from dead-on eye level, and even so, this mesh looks much better
Hoping to try the test fit soon but schedule has been very busy (OP was nearly a year and a half ago!)
Most importantly, this stuff is much more visible, particularly at an angle due to its depth, which IMO makes the biggest difference as the front grille will likely never be viewed from dead-on eye level, and even so, this mesh looks much better
Hoping to try the test fit soon but schedule has been very busy (OP was nearly a year and a half ago!)
Much better. The thin mesh provided is a bit weak.
Did you get the big infiniti emblem?
08-27-2014, 09:24 PM
#17
Registered Member
Thread Starter
New mesh installed, see earlier photos for comparison
Little tough to notice difference in the photos (obviously light source is different as well), but in person it's a significant improvement. No longer looks like an aftermarket part, but rather an OEM option (well, the Fuji emblem is a requisite as well but you get the idea)
Pretty happy this is FINALLY materializing and is coming out pretty much as expected, BUT I know I'll have a few hurdles during the install as well, we'll see how it goes...
Little tough to notice difference in the photos (obviously light source is different as well), but in person it's a significant improvement. No longer looks like an aftermarket part, but rather an OEM option (well, the Fuji emblem is a requisite as well but you get the idea)
Pretty happy this is FINALLY materializing and is coming out pretty much as expected, BUT I know I'll have a few hurdles during the install as well, we'll see how it goes...
Last edited by STownSaint; 08-27-2014 at 09:33 PM.
08-27-2014, 09:30 PM
#18
Registered Member
Thread Starter
Won't order the emblem until I do the install, but strongly considering the QX56 rear hatch emblem.
Only reason why I might not is the emblem is flat but the mesh is rounded, so I worry that the bigger the emblem, the poorer the fitment (if that makes sense).
This project has been going in very sequential steps in case I fudged it up along the way lol, but getting pretty close to the end
08-27-2014, 10:04 PM
#19
Thanks Alfredo!
Won't order the emblem until I do the install, but strongly considering the QX56 rear hatch emblem.
Only reason why I might not is the emblem is flat but the mesh is rounded, so I worry that the bigger the emblem, the poorer the fitment (if that makes sense).
This project has been going in very sequential steps in case I fudged it up along the way lol, but getting pretty close to the end
Won't order the emblem until I do the install, but strongly considering the QX56 rear hatch emblem.
Only reason why I might not is the emblem is flat but the mesh is rounded, so I worry that the bigger the emblem, the poorer the fitment (if that makes sense).
This project has been going in very sequential steps in case I fudged it up along the way lol, but getting pretty close to the end
More so if you have a CAI to show off
08-27-2014, 10:30 PM
#20
Registered Member
Thread Starter
^lol baby steps, but agreed, much potential of this grille is wasted without the CAI tubes/filters showing thru, looks great on yours
08-28-2014, 06:47 PM
#22
Registered Member
Thread Starter
Here's how it looks with the OEM front emblem, to me this size looks good, the catch is due to how the emblem mounts into the OEM grille, it wouldn't look good installed on the mesh (oh well), so need to get one that will fit flush (likely a G or QX56 rear emblem, still deciding)
But look how big of a difference the mesh & emblem make!
Might give the install a shot later if I have time
But look how big of a difference the mesh & emblem make!
Might give the install a shot later if I have time
08-28-2014, 08:46 PM
#23
Registered Member
Thread Starter
Sooooo made some fitment adjustments and got it installed!
Ran out of sunlight so took photos in the garage down the block
The mesh made a very significant difference, IMO it has the OEM aesthetic that I've been after, now just need to figure out the best option for the Fuji logo to go into the center
Ran out of sunlight so took photos in the garage down the block
The mesh made a very significant difference, IMO it has the OEM aesthetic that I've been after, now just need to figure out the best option for the Fuji logo to go into the center
08-30-2014, 09:47 PM
#24
Wow, this is perfect, I want this exact grill. So there is nowhere that makes a grill with that mesh you used already installed? I really want a grill exactly like the one you made is it really a DIY grill?
08-30-2014, 11:03 PM
#25
08-31-2014, 09:48 AM
#26
Registered Member
Thread Starter
Few photos in daylight (one with old mesh for reference) ... looks even better during the day IMO
Key thing (to me) is that the mesh in the upper grille is a very close match to the lower grille
Alfredo: here's the emblem I'm going with (part number 62890-1BA1A), little larger than OEM size but nothing drastic
http://www.ebay.com/itm/271571692723?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Key thing (to me) is that the mesh in the upper grille is a very close match to the lower grille
Alfredo: here's the emblem I'm going with (part number 62890-1BA1A), little larger than OEM size but nothing drastic
http://www.ebay.com/itm/271571692723?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
08-31-2014, 09:53 AM
#27
Registered Member
Thread Starter
You can but the one from warpeacelove to save a few bucks, or you can buy here: Infiniti G37 2010-2013 Sedan Mesh Grille - C-mod Grilles
Either way you'll still need to replace the mesh if you want the same look as above. Good luck!
08-31-2014, 05:02 PM
#28
Like I said in the chat thread, this looks much better w/ the new mesh, it really hides that vertical emblem mount (or at least from your pics it does).
Would really complete the look w/ a nice CAI behind the grill.
At any rate, it looks mean, stealthy and badas$
Great job IMO
Would really complete the look w/ a nice CAI behind the grill.
At any rate, it looks mean, stealthy and badas$
Great job IMO
The following users liked this post:
STownSaint (09-09-2014)
The following users liked this post:
STownSaint (09-09-2014)
09-01-2014, 10:36 PM
#30
Registered Member
Thread Starter
Thanks fellas
BL: that post in the middle still there, just hidden better w/ mesh, will be even more obscured once the Fuji emblem is installed, should be in this week, will keep you folks posted. Noted on CAI
BL: that post in the middle still there, just hidden better w/ mesh, will be even more obscured once the Fuji emblem is installed, should be in this week, will keep you folks posted. Noted on CAI