oliveview

DJ Hellfire:

You're running HID, not HIR, in the fog light spot? What about the extra pieces required to run HID?

Yan141

iTrader: (3)

HID should be pnp.

ChuToy

I went with Diode Dynamics HID conversion kits for my fogs and they are 9006 bulbs as well. I have a 2009 x non-s, but the fogs are in the headlight housing. Install was easy and it was just the fact of putting the small ballast somewhere. I also swapped the stock HID headlights to 6000k bulbs to match color.

Before:


After:

infinmyg

2009 Infiniti G37 Sedan Light Bulb Size Chart:


Low Beam Headlight Bulb Size: HID-D2S

High Beam Headlight Bulb Size: HID-D2S

Parking Light Bulb Size: 2827

Front Turn Signal Light Bulb Size: 992 (7440A)

Rear Turn Signal Light Bulb Size: 7440

Tail Light Bulb Size: LED
Stop Light Bulb Size: LED

High Mount Stop Light Bulb Size: LED

Fog/Driving Light Bulb Size: 9006

License Plate Light Bulb Size: 168

Back Up Light Bulb Size: 921

Front Side Marker Light Bulb Size: 2827

Rear Side Marker Light Bulb Size: 194

Map Light Bulb Size: DE3175

Trunk/Cargo Area Light Bulb Size: 158

oliveview

Thanks! My wife took the G to work today, so I don't have access to the manual.

oliveview

Okay, thanks. I would have to assume that adding the HID bulbs to the fog banks must add some serious illumination, yes?

ChuToy

A large amount actually, but they do aim lower so it doesn't seem to annoy other drivers.

oliveview

I forget. Do the fogs stay "on" when the brights are activated? Or does that cancel them out, like most factory cars?

ChuToy

They do not stay on when you turn on your brights.

jktinen

What is the clear lense? anyone have a picture?

Yan141

iTrader: (3)

This is what you get when u swap to sti-r clear lens

hhyder

i wanted to swap the ugly white fog lights on my car with bright yellows and ordered a pair from ebay. i got the 'H1' bulbs. is that the correct size?

H1 DT 3000K Xenon Halogen Yellow Replacement Fog Light Bulbs Replacement | eBay

hhyder

UPDATE: i got the bulbs and tried them out. took the intake out and got the fog lights from there. came to find out the hard way that h1 is the wrong size reread this thread and now realize that i should have ordered 9006

svhomicide

Is there a stocket to put a bulb for the fogs or do I need to buy a 9006 hid kit and wire it myself