Shifter Knob scratch removal?
12-25-2012, 01:15 PM
#1
Registered User
Thread Starter
Join Date: Dec 2012
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Shifter **** scratch removal?
Hey guys, do you guys recommend any products/procedures in removing scratches from the aluminium part of the shifter ****? I think somebody had a ring on the hand while shifting or something.
Thanks!
Thanks!
12-25-2012, 02:32 PM
#2
i had the same problem, but ended up painting mine.
you can also find used/new shifters on ebay for around $100-140 if you wanted to go that route or do the M shifter upgrade (which i think you need to slightly dremel the connecter point on the M shifter).
all i did was take the shifter off and mask it real well with masking tape, then sand/paint/clear coat it.
you can also find used/new shifters on ebay for around $100-140 if you wanted to go that route or do the M shifter upgrade (which i think you need to slightly dremel the connecter point on the M shifter).
all i did was take the shifter off and mask it real well with masking tape, then sand/paint/clear coat it.
12-25-2012, 02:54 PM
#3
i had the same problem, but ended up painting mine.
you can also find used/new shifters on ebay for around $100-140 if you wanted to go that route or do the M shifter upgrade (which i think you need to slightly dremel the connecter point on the M shifter).
all i did was take the shifter off and mask it real well with masking tape, then sand/paint/clear coat it.
you can also find used/new shifters on ebay for around $100-140 if you wanted to go that route or do the M shifter upgrade (which i think you need to slightly dremel the connecter point on the M shifter).
all i did was take the shifter off and mask it real well with masking tape, then sand/paint/clear coat it.
Thread
Thread Starter
Forum
Replies
Last Post
4DRZ
Drivetrain
34
08-05-2021 10:02 AM
IrishMike
G37 Sedan
1
09-16-2015 07:07 PM
