xxg00w0

iTrader: (1)

which type of LED strip did you used?
FIRST 2 Xenon White 48 LED Flexible Side Glow Strip Daytime Running Driving Fog Light | eBay


SECOND New 5M Waterproof 5050 300 LED SMD White Flexible LED Lamp Light Strip Car Auto | eBay

SgtGoldy

iTrader: (6)

I think I would individually wire up each led to make them less in number. But either way awesome DIY

NeuroG37spine

iTrader: (3)

WFLB-xx series Waterproof LED Flexible Light Bar | Side Emitting | Flexible LED Light Strips | LED Light Strips & Bars | Super Bright LEDs

I believe this is the strand i used. I definitely with Superbrightleds.com because of their quality reputation. Secondly i went with this strip because of how they wired in a series configuration. Every 3rd light can be cut. I actually cut 6 lights off of each side to fit the length i was going after.

I wired them together, but grounded each side separately. I also added a switch just in case i ever wanted to turn them off.

Found a pretty sweet touch sensor switch that is completely flat so blend in under the dash entirely flush. I put the switch in one of the empty slots to the left under the steering wheel. I'll take pictures of this as well.

I wired all the light wiring near the cabin filter (took out the glove box to get to this) and then behind the stereo to the switch. There is probably a better way but trying to go through the wiring grommet seemed to be a hassle so I went this route instead.

Shift

This picture is great and it reminds me of these which i would love to see installed on a G37

NeuroG37spine

iTrader: (3)

^^^^ That doesnt look too terribly difficult. I haven't done my headlights yet, but i wanted to do something unique to those as well. I will keep you guys posted on what i come up with.

Shift

If you go with LED strips on that video then you'll be the first on this site to do that mod since no one has tried it yet. It really is unique hopefully you choose this mod! Let me know what you decide!

NeuroG37spine

iTrader: (3)

Here are a few pics of the switch I used. Its completely flush with the lower console and is a touch sensor. When on it has a blue light showing and when off it has a red light showing. I have never actually turned them off while driving, but i thought i might install it just in case. Plus i have a few empty slots anyway, so why not.

Shift

That looks great! Where did you get the switch and was it hard to install? Im surprised more people dont add a custom switch to their DRL's

NeuroG37spine

iTrader: (3)

surprisingly I got the switch at autozone. And it was somewhat just because it didnt come with any instructions on what the 3 prongs on the bottom of the switch actually did. So i had to kind of figure that out on my own.

wblhockey14

looks good sir

Awooo21

What brand led lights did you use?

xxg00w0

iTrader: (1)

how did you wire the switch to the lights?

ko3r

looks too gooood.

NeuroG37spine

iTrader: (3)

If you look through the entire post you will find the website link that I posted.

Thanks guys glad you like it!

NeuroG37spine

iTrader: (3)

on the back of the switch, there are 3 prongs. ground, accessory, power. I ground the switch to a bolt near the stereo. the accessory prong goes to the lights and the power prong i hooked up to a power wire near the stereo as well.