Debadging: lettering outline remaining?

Reply Subscribe

Thread Tools

Search this Thread

09-19-2011 | 05:07 AM

#16

Doggy

Registered User

iTrader: (12)

Joined: Jul 2010

Posts: 4,354

Likes: 4

From: Sf valley

Speaking from experience, DO NOT use 1. Gasoline or 2. Laquer thinner or any kind of thinner. Rubbing compound is enough

Reply Like

09-19-2011 | 04:59 PM

#17

daicon0

Registered User

iTrader: (1)

Joined: Jun 2011

Posts: 91

Likes: 0

Like most people said, rubbing compound, polish then wax by hand, if it's still there, do it again, if still there after that give it an hour or two then do it again, if all that fails which it really shouldn't then you'll have to use a buffer but personally I recently took off the back emblem from my 08 coupe and I only had to do the process once. The ghosting appearance from the emblem was really visible too. Good luck this is definitely the easy part

Reply Like

09-22-2011 | 01:21 AM

#18

Sena

Registered User

iTrader: (5)

Joined: Jul 2010

Posts: 1,288

Likes: 2

polish and wax

Reply Like

09-22-2011 | 10:44 AM

#19

_ant_

Registered User

iTrader: (4)

Joined: Apr 2011

Posts: 2,634

Likes: 8

From: Miami, FL

Quote:

Originally Posted by POLLO

If you're not comfortable in doing it , don't do it at all, or at least don't try to push it if you aren't making progress. I did the same and ended up jacking up my trunk lid that I needed to get it repainted.

lolz pollo is useless